Auto Power Off Function; System Lock Function - Sharp XG-PH50X Operation Manual

Conference series
Table of Contents

Advertisement

Auto Power Off Function

Menu operation
Page
Example: "Options (1)" screen menu for
INPUT 1 (RGB) mode
Description of Auto Power Off
Selectable items
ON
The projector automatically enters the
standby mode when no input signal is
detected for 15 minutes or longer.
OFF
The "Auto Power Off" function will be
disabled.
Note
• When "Auto Power Off" is set to "ON", 5 min-
utes before the projector enters the standby
mode, the message "Enter STANDBY mode in
X min." will appear on the screen to indicate
the remaining minutes.
56
Description
System Lock
This function prevents unauthorized use of the pro-
jector. Once this function is activated, users must enter
the correct keycode each time the projector is turned
on. We suggest you record the keycode in a safe place
where only authorized users have access.
Info
• If you lose or forget your keycode, contact your near-
est Sharp Authorized Projector Dealer or Service
Center (see page 101). Even if the product war-
ranty is valid, the keycode reset will incur a charge.
Menu operation
Page
Example: "Options (1)" screen menu for
INPUT 1 (RGB) mode
Setting the keycode
1
Select "System Lock" on the "Op-
tions (1)" menu, then press | | | | | .
• A message is displayed.
• Read this message, and press
2
Press the 4 buttons on the remote
control or on the projector to enter
the preset keycode in "Old Code".
• When setting the keycode for the first time,
press " on the projector for four times.
Function
58
.
-79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xg-ph50x-nl

Table of Contents