Resize Mode - Sharp XG-PH50X Operation Manual

Image Projection
This function allows you to modify or customize the resize mode to enhance the input image. Depend-
ing on the input signal, you can choose "NORMAL", "FULL", "DOT BY DOT", "BORDER", "STRETCH"
or "SMART STRETCH" image.

Resize Mode

Press on the remote control.
• Pressing changes the display as shown.
• To return to the standard image, press
"RESIZE" is displayed on the screen.
• This function can also be accessed from the OSD
menu (see page 74).
COMPUTER
SVGA (800 × 600)
XGA (1024 × 768)
4:3 aspect ratio
SXGA (1280 × 960)
UXGA (1600 × 1200)
Other aspect ratios SXGA (1280 × 1024)
• "NORMAL" is fixed when XGA (1024 × 768) signals are entered.
Input signal
Computer
Resolution lower than
XGA
XGA
Resolution higher than
XGA
SXGA (1280 × × × × × 1024)
-48
while
NORMAL
1024 × 768
1024 × 768
1024 × 768
1024 × 768
960 × 768
Image type NORMAL
4:3 aspect ratio
4:3 aspect ratio
4:3 aspect ratio
Mouse/adjustment button
('/"/\/|)
FULL
—
—
—
—
1024 × 768
Output screen image
FULL
: Cutout area on which images cannot be projected.
: Area where the signals are off screen.
UNDO button
RESIZE button
DOT BY DOT
800 × 600
—
1280 × 960
1600 × 1200
1280 × 1024
DOT BY DOT