Checking The Input Signal; Auto Sync Adjustment - Sharp XG-PH50X Operation Manual

Computer Image Adjustment ("Fine Sync" menu)

Checking the Input Signal

Menu operation Page
Example: "Fine Sync" screen menu for
INPUT 1 (RGB) mode
Note
• The projector will display the number of scanned
lines available from audio-visual equipment
such as a DVD player or Digital Video.
• The projector will display the resolution when
connecting the computer.
-70
56

Auto Sync Adjustment

Used to automatically adjust a computer image.
Menu operation Page
Example: "Fine Sync" screen menu for
INPUT 1 (RGB) mode
Description of Auto Sync
Selectable items
Auto Sync adjustment is not automati-
OFF
cally performed.
Auto Sync adjustment will occur when
the projector is turned on or when the
Normal
input signals are switched, when
connected to a computer.
"Normal" takes more time than "High
High Speed
Speed" for more accurate Auto Sync
adjustment.
Note
• Auto Sync adjustment is also performed by
pressing on the projector or
remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 68.)
• When is pressed while "Auto Sync" is "OFF"
or "High Speed", Auto Sync will be executed in
"High Speed" mode. If the button is pressed
again within one minute, Auto Sync will be ex-
ecuted in "Normal" mode.
58
Adjustment
Description
on the