Auto Sync Adjustment; Checking The Input Signal - Sharp XV-Z2000 Operation Manual

Computer Image Adjustment ("Fine Sync" menu)

Auto Sync Adjustment

Select whether the image is to be synchronized
automatically when switching the signal with
"ON" or "OFF".
Menu operation
Example: "Fine Sync" menu screen for
INPUT 5 (RGB) mode
Description of Auto Sync Adjustment
Selectable items
Auto Sync adjustment will occur when
(ON)
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
(OFF)
cally performed.
Note
• Auto Sync adjustment is also performed by
pressing
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 45.)
• "Auto Sync" cannot be used in the DIGITAL
mode.
-46
Downloaded From projector-manual.com Sharp Manuals
Page 40
Description
on the remote control.

Checking the Input Signal

This function allows you to check the current in-
put signal information.
Menu operation Page 40
Example: "Fine Sync" menu screen for
INPUT 5 (RGB) mode
Note
• 540P is displayed on the screen when signal
1080 I is inputted during DVI connection.