Digital Image Magnification - Sharp NoteVision XG-NV7XE Operation Manual

Digital Image Magnification

Projector
On-screen Display
Remote control
2
1
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ.)
1 Press ENLARGE. Each time ENLARGE is
pressed, the image will be magnified.
2 When the image is magnified, you can pan and
scan around the image by using ∂/ƒ/ß/©.
• Each time ENLARGE is pressed, image magnification
toggles as shown below.
1 2
• If the input signal is changed during digital image
magnification, the image will return to
is changed
(a) when INPUT is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
3 To return to
3
MOUSE
3 4 6
1. The input signal
1, press UNDO.
ADJ.
8
34