Digital Image Magnification - Sharp Notevision XG-C40XU Operation Manual

Digital Image
Projector
2
1
3
On-screen Display
Magnification
Remote control This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
• Each time ENLARGE is pressed, image magnification
• If the input signal is changed during digital image
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ.)
1 Press ENLARGE. Each time ENLARGE is
pressed, the image will be magnified.
2 When the image is magnified, you can pan and
scan around the image by using ∂/ƒ/ß/©.
toggles as shown below.
1 4 9
magnification, the image will return to
is changed
(a) when INPUT is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
3 To return to
1, press UNDO.
MOUSE ADJ.
16 36 64
1. The input signal
E-36