Sharp NoteVision XG-NV7XE Operation Manual page 25

Operating the Wireless Mouse from the Remote Control
Use as a Wireless Mouse
Be sure the supplied remote mouse receiver is connected to your computer.
1
Slide the MOUSE/ADJUSTMENT switch to MOUSE.
MOUSE ADJ.
Effective buttons in MOUSE mode
BLACK SCREEN
• The wireless mouse may not operate correctly if your computer serial port is not correctly set up. Refer
to the computer's operation manual for details of setting up/installing the mouse driver.
• For one-button mouse systems, use either the LEFT-CLICK or RIGHT-CLICK button.
Using the remote control in a dark room
Press BACKLIGHT, and the buttons will light up. Green lights refer to mouse operations, and red
lights to projector adjustments.
Button name
Position of MOUSE/ADJUSTMENT switch
MOUSE
LASER POINTER/MENU LASER POINTER (GREEN)
BLACK SCREEN/KEYSTONE BLACK SCREEN (GREEN)
RIGHT-CLICK/ENTER RIGHT-CLICK (GREEN)
MOUSE/ADJUSTMENT MOUSE (NOT LIT)
LEFT-CLICK/UNDO LEFT-CLICK (NOT LIT)
POWER ON/OFF
VOLUME /
MUTE
Use as a Laser pointer
1 Slide the MOUSE/ADJUSTMENT switch to MOUSE.
MOUSE ADJ.
2 Press LASER POINTER ( ) to activate the laser pointer.
When the button is released, the light automatically goes off.
• For safety, the laser pointer automatically goes off after 1 minute of continuous use. To turn it on,
release LASER POINTER (
MOUSE
RIGHT-CLICK
ADJ.
MENU (RED)
KEYSTONE (RED)
ENTER (RED)
ADJUSTMENT (NOT LIT)
UNDO (NOT LIT)
ON (RED)
) and press again.
LASER
POINTER
LEFT-CLICK
Button name
Position of MOUSE/ADJUSTMENT switch
MOUSE
INPUT
IrCOM
FREEZE
AUTO SYNC
ENLARGE
RESIZE
TOOLS
GAMMA
ADJ.
ON (RED)
22