Sleep Operation; Setting The Sleep Timer - Sharp HT-CN650DVW Operation Manual

Sleep operation

HT-CN650DVW
ON STAND-BY
SLEEP
50
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
SLOW PLAY PAUSE OSD
TUNING STOP TUNING
FUNCTION SETUP
ENTER
MENU TITLE
PBC RETURN
1 2 3
4 5 6
7 8 9
EQUALIZER PROG
0
MIC LISTENING
VOLUME
ECHO MODE
AUDIO SUBTITLE ZOOM ANGLE
SLEEP DIRECT REPEAT A-B

Setting the sleep timer

You can set the unit to the power stand-by mode at the specified time.
1
Playback the desired sound source.
2
Press the SLEEP button.
TV screen
Sleep 120mins
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time will
decrease as follows.
90 MINS
120 MINS
3
Your system will enter the power stand-by mode automatically
after the preset time has elapsed.
To cancel the sleep operation:
To cancel the sleep operation, press the SLEEP button until "OFF" appears on the
display.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
Unit display
SLEEP
60 MINS 30 MINS
OFF