To Start Playback From The Desired Point (Direct Play) - Sharp HT-CN650DVW Operation Manual

Basic operation (continued)
HT-CN650DVW
2
Enter title or chapter number with the Direct Number buttons.
To specify title or track 1, enter "01" (must use 2 digits).
If you enter the wrong numbers, press , or 9 button to select the concerned
track and then re-enter the new numbers.
To clear all the numbers those entered, press 9 button to select "Reset" and
then press ENTER button.
3
Press button to select "Start" and then
9
press ENTER button to start playback the
programmed track(s).
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you perform the following
operations:
Switch the input or remove the discs.
Set to the stand-by mode.
To start playback from the desired point (di-
rect play)
To select and play the desired title and chapter:
In the stop mode
1
Whilst in the stop mode, press the DIRECT button.
TV screen
TITLE 01/02 CHAPTER 001/002
2
Within 10 seconds, enter the title number first then only can enter
the chapter number by using the Direct Number buttons. You can
also press or
;
Example:
To select title or chapter 1: Press "01".
To select title or chapter 12: Press "1" and "2".
To select title or chapter 22: Press "2" and "2".
30
Reset
button at this time for title or chapter selection.
:
In the playback mode
1
Whilst in the playback mode, press the DIRECT button.
2
Select the title or chapter by pressing the
TV screen
ENTER button.
3
Enter the title or chapter number using the Direct Number buttons.
1 TT: 01 CH: 02 6 TT: CH:
2 TT: 02 CH: 02 7 TT: CH:
To select chapter 1: Press "0" and "1".
3 TT: CH: 8 TT: CH:
4 TT: CH: 9 TT: CH:
To select chapter 12: Press "1" and "2".
5 TT: CH: 10 TT: CH:
Exit Start NEXT
Playback starts after you complete enter the number(s) (bottom).
4
Press the DIRECT button to return to the actual size of image
(standard screen).
Notes:
Direct play feature is disabled on some discs.
Some discs may not display the chapter number.
With DVDs, you can specify the desired point only in the current title and not in
another title.
To play by specifying time (time search):
You can playback from the desired point by specifying the time.
In the playback mode
1
Whilst in the playback mode, press the DIRECT button.
2
Press
3
Specify the time with the Direct Number buttons.
To specify 1 hour 23 minutes and 40 seconds, enter "12340".
If you enter the wrong number, start over from step 1.
Playback starts after you complete enter the number(s) (on the bottom of column).
4
Press the DIRECT button to return to the actual size of image
(standard screen).
Notes:
Some discs cannot play from the specified point.
Time search feature is disabled on some discs.
TV screen
TV screen
Track 01/01
Disc Time 0:49:59
Track Time O:49:59
Repeat Off
Total Elapsed 0:03:42
Bitrate 15
or button to select "TT Time" then press the ENTER button.
9 8
TT Time 1 : 2 3 : 4 0
or button and press the
8 9