Sharp DK-AP2 Operation Manual page 10

Listening to the iPod (continued)
DK-AP2
DK-AP2(BK)
To insert iPod adaptor
1. Insert the iPod adaptor into unit and connect your iPod.
iPod (bottom)
Dock connector
iPod adaptor
iPod dock
iPod connector
10
iPod
To remove iPod adaptor
Insert the tip of a screwdriver ("-" type, small) into the iPod adaptor
hole as shown and lift upward to remove.
iPod playback
Note:
Do not connect the Audio cable to AUX IN socket during iPod play-
back. Otherwise, sound from the iPod will not be heard.
1
Press the ON/STAND-BY button to turn the power on.
2
Insert iPod unit in the iPod dock of main unit.
iPod adaptor
3
Press the / button to start playback.
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do so even
during playback.
iPod