Messages And Signals - Sharp FO-475 Operation Manual

Display Messages

Messages and Signals

Display messages
Note: If you have turned on the Caller ID function, see Caller ID in
Chapter 7 for display messages related to Caller ID.
ANS. TRANSFER
DOCUMENT JAMMED
FUNCTION MODE
HOLD
LINE ERROR
NO DATA
NO # STORED
OUT OF PAPER
ON HOOK DIAL
OVER HEAT
110
The answering machine's transfer function has been
turned on as explained in Transfer Function in
Chapter 2.
The original document is jammed. See the following
section, Clearing Paper Jams .
The FUNCTION key has been pressed.
The HOLD/SEARCH key has been pressed to put
the other party on hold during a phone conversation.
Press the HOLD/SEARCH again to take the other
party off hold.
Transmission or reception was not successful. Press
STOP to clear the message, and then try again. If the
error persists, see Line Error in Problems and
Solutions in this chapter.
This appears if you attempt to search for an
automatic dialling number when none have been
stored.
You have tried to dial or clear a Rapid Key or Speed
Dial number that hasn't been programmed (a full
number hasn't been assigned to it).
You have run out of fax paper. Load a new roll of fax
paper as explained in Loading the Fax Paper in
Chapter 1.
The SPEAKER key has been pressed and the fax is
waiting for you to dial. (To return to the date and time
display, press the SPEAKER key again.)
The print head has overheated. Operation may be
continued once it cools.