Override Ringing - Sharp FO-475 Operation Manual

Override Ringing

Override Ringing
This function allows selected callers using a touch-tone telephone to override
the answering machine's outgoing message and cause the FO-475 to make a
special ringing sound, alerting you that they are calling. This is useful when
you are near the machine but only want to talk with certain callers, taking all
other calls on the answering machine.
Programming the override code
To override the answering machine, your callers must enter a 3-digit override
code from their telephone. This code has been set to "009" at the factory. If
you want to change it, press the panel keys as shown below.
Important!
Make sure the override code is different from the remote code or any
passcodes programmed for boxes.
1
Press these keys:
The display will show:
2
Press these keys:
The display will show:
3
Enter a 3-digit code number by pressing
the number keys.
4
Press the START/MEMORY key and
then the STOP key.
36
FUNCTION
ANS. SETTINGS
OVERRIDE CODE
0
5 4
5
(Example)
START/MEMORY
STOP