Sharp FO-475 Operation Manual page 125

2
Remove the paper roll.
If any pieces of paper are stuck in the
cutter, remove them with caution.
Press the START/MEMORY key to
reset the cutter.
3
Cut off the wrinkled part of the paper.
4
Reload the paper.
Jammed fax paper is often caused by
improper loading. Be sure to carefully
follow the instructions for paper
loading given in Loading the Fax Paper
in Chapter 1.
If the display still shows PAPER JAMMED
If the display still shows PAPER JAMMED after you press the
START/MEMORY key in Step 2 above, the cutter is still engaged in the
cutting position. To open the cutter, turn the fax up on its rear end and insert
any long, rod-like object with a flat or blunt end into the hole marked
Clearing Paper Jams
113