Turning The Power Off - Sharp Notevision XG-C58X Operation Manual

Turning the Power off

1
Press
STANDBY
or on the remote control,
then press that button again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.
Note
• If you accidentally pressed
or
STANDBY
to put the projector into the standby
mode, wait until the confirmation
message disappears.
• The projector cannot be operated
while a message "Shutting Down.
Please Wait." is displayed.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due to
the rise in internal temperature, as
the cooling fan also stops.
on the projector
and do not want
STANDBY button
ENTER button
MENU
button
', ", \, |
buttons
MUTE button
-37