Table of Contents
Advertisement
Take the following points into consideration when selecting a site for your
FO-I 35:
E
n
v
i
r
o
The machine must be installed on a level surface.
Keep the machine away from air conditioners, heaters, direct sunlight, and dust.
Provide easy access to the front, back, and sides of the machine. In particular,
keep the area in front of the machine clear, or the original document may jam as
it comes out after scanning.
The temperature should be between 5° and 35°C.
The humidity should be between 300/0 and 85% (without condensation).
E
l
e
c
t
r
A 230-240 V, 50 Hz, earthed (3-prong) AC outlet is required.
I
e
a
i
o
a
p
p
t
s
T
e
l
e
p
j
a
A standard telephone jack must be located near the machine.
I t
h
m
a
c
i m
o
f
r
a c
o
t a w
p
l
If the machine is moved from a cold to a warm place, it is possible that the
reading glass may mist up due to condensation, preventing proper scanning
of documents for transmission. To remove the mist, turn on the power and
wait approximately 2 hours before using the machine.
INSTALLATION
2-1
Advertisement
Table of Contents
