Sharp FO-135 Operation Manual page 44

Table of Contents

Advertisement

PROBLEMS
S
Problem
Nothing is printed when you try
to receive a document.
The recording paper does not
come out.
The received image has low
contrast.
Received images are distofied.
Copies are distorted.
Reception/copying is interrupted.
Check and remedy
Make sure that the recording paper is properly loaded ~
in your machine.
I
Make sure the power is on.
1!
,,
I
Make sure that the document for transmission is
I
loaded face down in the feeder of the other machine.
~
c Make sure the paper is not jammed (see "Clearing
~
jammed recording paper" in this chapter).
Make sure that the recommended recording paper is
~
used (see "Recording paper" in Chapter 9).
i
1
Ask the other party to send higher contrast
]!
documents. If the contrast is still too low, your
j
machine may have
a
a
copy to check
~
it.
I
I
Noise on the telephone line may cause distortion.
~
Have the other party try sending the document again. ~
The recording head may be dirty (see "Cleaning the
scanning and printing parts" in Chapter 9).
I
Make a copy of another document
If ~
the copy is also distorted, your machine may have a
~
problem. If the problem persists, call for service.
I
Make sure that the recommended recording paper is
used (see "Recording paper" in Chapter 9).
,
Make sure that the recording paper is properly loaded ~~
in your machine.
I
I
The recording head may be dirty (see "Cleaning the
'
scanning and printing parts" in Chapter 9).
1'
Make a copy of another document on your machine. If II
the copy is also distorted, your machine may have a
~~
problem. If the problem persists, call for service.
I
" If reception or copying has been done continuously
1:
for a long time, the recording head maybe
II
overheated. Turn off the power and let it cool down.
~
TROUBLESHOOTING

Advertisement

Table of Contents
loading

Table of Contents