Table of Contents
Advertisement
User switches are electronic switches located in the micro-circuitry
of the FO-130. These switches
control various aspects of the functioning
of the machine. Each switch is set at the factory; however,
you may want to change one or more of these settings to better suit your needs. The switches are
described in the list below, along with their corresponding
settings.
1.
2.
3.
4.
ACCESSING
THE SWITCHES
Press the FUNCTION
key and "4" to enter USER SWITCH MODE (this will appear in
the display).
Scroll through the list of switches
by pressing "#" to move forward, or 'W' to move
backward. The switches will appear in the order shown below.
When the desired switch appears in the display, make the setting.
After the setting is made, the display will show the next item in the list. You can either
make a setting for that item, or press STOP to exit USER SWITCH MODE.
SWITCH SElTINGS
Switch 1:
FINE RESOLUTION
PRIORITY
This switch is used to change the default resolution for document transmission
from STANDARD
to FINE. Press "1" (YES) to change it to FINE, or "2" (NO) to change it back to STANDARD.
l
Factory setting:
"2"
Switch 2:
NUMBER OF RINGS TO ANSWER
This sets the number of rings the fax machine waits before answering an incoming call in automatic
reception mode. Press
"1"
to select 4 rings, or "2" to select 1 ring.
l
Factory setting:
"2"
Switch 3:
4 RINGS MANUAL ANSWER
Press "1" (YES) to have the machine answer a call after 4 rings when it is in manual reception
mode. Press "2" (NO) to disable the function.
l
Factory setting:
"2"
OPTIONAL
SETTINGS
AND DATA ENTRY
5-5
Advertisement
Table of Contents
