Boot Configuration
Setup Prompt Timeout
Press <+> and <-> keys to adjust the desired number.
Bootup NumLock State
Allows you to select power-on state for NumLock function.
Options available: On/Off. Default setting is On.
Quiet Boot
This BIOS feature determines if the BIOS should hide the normal POST message with the motherboard
or system manufacturer's full-screen.
When it is enabled, the BIOS will display the full-screen logo during the boot-up sequence, hiding normal
POST message.
When it is disabled, the BIOS will display the normal POST messages, instead of the full-screen logo,
Options available: Enabled/Disabled. Default setting is Disabled.
Fast Boot
If enabled, the system will speed the boot up time.
Options available: Enabled/Disabled. Default setting is Enabled.
• The following four items appears and configurable when the Fast Boot is set to Enabled.
VGA Support
All VGA devices will not be available until OS boot up for a fastest POST time.
Options available: Enabled/Disabled. Default setting is Enabled.
USB Support
All USB devices will not be available until OS boot up for a fastest POST time.
Options available: Enabled/Disabled. Default setting is Enabled.
PS2 Devices Support
The PS/2 keyboard and mouse devices will not be available until OS boot up for a fastest POST time.
Options available: Enabled/Disabled. Default setting is Enabled.
Network Stack Drive Support
When enabled, the system will load the network stack driver during POST.
When disabled, the system will skip the network stack driver from loading during POST.
Options available: Enabled/Disabled. Default setting is Disabled.
Boot Option Priorities
Boot Option #1/2/3
Press Enter to configure the boot priority.
Hard Drive BBS Priorities
Press Enter to configure the boot priority.
- 43 -
BIOS Setup