For Wired Network Interface Users; Connect The Network Cable - Brother MFC-J6510DW Quick Setup Manual

Wired Network

For wired network interface users

®
(Windows 2000 Professional/XP Home/XP Professional/Windows Vista
18
Before you install
a
Make sure that your computer is ON and you
are logged on with Administrator rights.
IMPORTANT
If there are any programs running, close them.
Note
• For the latest drivers and information, visit
http://solutions.brother.com/.
• The screens may differ depending on your
operating system.
• The installation CD-ROM includes ScanSoft™
PaperPort™12SE. This software supports
®
Windows XP Home (SP3 or greater), XP
Professional (SP3 or greater), Windows Vista
(SP2 or greater) and Windows
®
the latest Windows Service Pack before
installing MFL-Pro Suite.
®
For Windows 2000 (SP4 or greater), when the
ScanSoft™ PaperPort™11SE download
screen appears during the installation of
MFL-Pro Suite, follow the on-screen
instructions.
19
Connect the network
cable
a
Lift the scanner cover into the open position.
b
c
®
®
7. Update to
Windows
®
/Windows
You will find the LAN socket marked with a
symbol inside the machine on the left as shown
below. Remove the protective cap and connect
the network cable to the LAN socket.
LAN USB
Carefully guide the network cable into the cable
channel and out the back of the machine.
Connect the cable to your network.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used,
guide both cables through the cable channel with
one on top of the other.
®
®
7)
19