Connect The Network Cable; For Wired Network Interface Users - Brother MFC-490CW Quick Setup Manual

Wired Network

For Wired Network Interface Users

®
(For Windows 2000 Professional/XP/XP Professional x64 Edition/
®
Windows Vista )
13
Before you install
a
Make sure that your computer is ON and you
are logged on with Administrator rights.
Important
• If there are any programs running, close
them.
• Make sure there are no memory cards or a
USB Flash memory drive inserted.
• The screens may differ depending on the
operating system.
• The supplied CD-ROM includes ScanSoft™
*
PaperPort™ 11SE . This software supports
®
Windows 2000 (SP4 or greater), XP (SP2 or
greater), XP Professional x64 Edition and
®
Windows Vista . Update to the latest
®
Windows Service Pack before installing
MFL-Pro Suite.
* For Hong Kong users, CD-ROM includes Presto!
®
PageManager instead of ScanSoft™ PaperPort™11SE.
Important
Before installation, if you are
using personal firewall
software (other than Windows
Firewall), anti-spyware or
antivirus applications,
temporarily disable them.
b
Disconnect the machine from the power
socket.
14
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
b
Connect the network cable to the LAN socket
marked with a
LAN socket inside the machine on the left as
®
shown below.
®
Windows
Connect the network
cable
symbol. You will find the
LAN USB
®
19