For Network Users; Restore The Network Settings To Factory Default; Entering Text For Wireless Settings - Brother MFC-J6510DW Quick Setup Manual

For Network Users

Restore the network settings to factory default

To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Network Reset.
Press OK.
e
Press 1 to choose Yes.
f
Press 1 to choose Yes.
g
The machine will restart, re-connect cables once this is complete.

Entering Text for Wireless Settings

Most number keys have three or four letters printed on them. The keys for 0, # and l do not have printed letters
because they are used for special characters.
By pressing the proper number key repeatedly, you can access the character you want.
For configuring wireless network settings
Press One Two
Key time times
2 a
3 d
4 g
5 j
6 m
7 p
8 t
9 w
Inserting spaces
To enter a space in a name, press c twice between characters.
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character, press Clear. Re-enter the correct character. You can also back up and insert a character.
Repeating characters
If you need to enter a character that is on the same key as the letter before, press c to move the cursor to the right
before you press the key again.
Special characters and symbols
Press l, # or 0 repeatedly until you see the special character or symbol you want.
Press l for
(space) ! " # $ % & ' ( )
Press # for : ; < = > ? @ [ ] ^ _
˜
Press 0 for
0 \ { | }
Three Four
times times
b c A
e f D
h i G
k l J
n o M
q r s
u v T
x y z
+ , - . /
Five Six Seven
times times times
B C 2
E F 3
H I 4
K L 5
N O 6
P Q R
U V 8
W X Y
Eight Nine
times times
a b
d e
g h
j k
m n
S 7
t u
Z 9
39