Connect Usb Cable; Before Install - Brother MFC-J6510DW Quick Setup Manual

USB
For USB interface users
18
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
Note
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/.
• For Mac OS X 10.4.0 to 10.4.10 users, upgrade
to Mac OS X 10.4.11 - 10.6.x.
19
Connect the USB cable
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Lift the scanner cover into the open position.
(Mac OS X 10.4.11, 10.5.x, 10.6.x)
b
c
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Macintosh
Connect the USB cable to the USB socket
marked with a symbol. You will find the
USB socket inside the machine on the right as
shown below.
LAN USB
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your Macintosh.
IMPORTANT
17