Washable Active Carbon Filter Care - Sharp FU-W43E Operation Manual

Plasmacluster free standing type
Table of Contents

Advertisement

WASHABLE ACTIVE CARBON FILTER CARE
Care Cycle
2 months
HAND WASH ONLY!
DO NOT TUMBLE DRY!
Rinse dirt from the WASHABLE ACTIVE CARBON
1
FILTER under lukewarm water.
Remove dust on the washable active carbon filter before washing.
CAUTION
• When washing the filter for the first time, the rinse water may be
brown. This does not affect deodorization performance.
• Avoid bending or folding the filter when washing.
Drip dry filter to remove excess water.
2
3
Dry filter completely in a well ventilated area. If
possible, dry outdoors.
Dry filter in a sideways position to avoid warping of the filter.
The filter takes about 6 hours to dry out.
CAUTION
• Avoid drying filter outdoors during inclement weather (e.g. rain or cold
temperatures).
• Do not allow filter to freeze.
• If filter is dried indoors, take precautions, such as placing towels, etc
under the filter to prevent water damage to the floor.
4
Replace the filter in unit. (See E-6).
Dry filter completely before replacing to prevent odours.
Do not operate unit without all filters properly installed.
E-11
HEPA Filter
Washable Active
Carbon Filter

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fu-w53e

Table of Contents