Preparation; Filter Installation - Sharp FU-W43E Operation Manual

PREPARATION

FILTER INSTALLATION
To maintain the quality of the filters, they are installed in the main unit and packed in
plastic bags. Be sure to remove the filters from the plastic bags before using the unit.
1
Remove the filters
1
Remove the Front Panel.
Pull the Front Panel on the
lower sides, and lift up.
2
Remove the Filter Support.
Push in the hooks on top, then pull the Filter Support.
3
Remove the Washabe Active Carbon Filter (Black) and
HEPA Filter (White) from the plastic bags.
HEPA Filter
Be sure to remove the power plug from the wall outlet.
Filter Support
Active Carbon Filter
E-6
Front Panel