Sharp FU-W43E Operation Manual page 9

2
Install the filters
1
Place the HEPA Filter into the
main unit.
Please make sure that the HEPA
Filter(blue) and the tab is placed
in proper direction.
Do not install the filter backwards or the
unit will not operate properly.
2
Insert the Filter Support's 2 bottom
tabs (left and right) into the small
holes in the unit, and slide the Active
Carbon Filter between the HEPA Filter
and the Filter Support.
3
Gently push in the upper tabs (left and
right) to lock in place.
4
Fill in the usage start date on the Date
Label.
Use the date as a guide for the Filter Replace-
ment schedule.
5
Replace the Front Panel.
Place the Front Panel from the obliquely up-
ward, then mount the hooks at the bottom.
Tab
(blue)
HEPA Filter
Active Carbon Filter
Filter Support
Bottom tabs
Front Panel
E-7
Upper tabs
Date Label