Projector Connection Using A Group - Epson POWERLITE 8300I EMP-8300 Operation Manual

Projecting PC Images (Network Screen)
Enter an IP address
6
register in "IP Address", and click "Add".
The projector name with the specified IP address will be added
to the registered projector list. If you with to register another
projector, repeat Step 6.
Up to 16 projectors can be registered in a single group.
To delete a projector from its list, select the projector name and
click "Delete".
7
Click "OK".
When a confirmation message appears, respond with "Yes".
The group will be stored.
When you edit and save an existing group or when the group
you have specified already exists, an overwrite confirmation
message appears. When you click "Yes", the group is stored by
overwriting. To save it under a different name, click "No" and
enter a group name in "Connection Group".
To delete a group, select it from "Connection Group" and click
"Delete".
8
Click "Close"
The Extension screen will appear again.
of the projector you wish to

Projector Connection Using a Group

PROCEDURE
Select "Start"- "Program" (or "All Programs")-
1
"EPSON Projector",- "EMP NS Connection" in this
order to start EMP NS Connection.
Click "Extension".
2
Check "Use IPconnect mode" and "Use group list".
3
Select a projector you wish to connect from
4
"Connection Group", and click "OK".
Select a projector you wish to connect, and click
5
"Connect".
EasyMP .net Operation Guide
30