On/Off; Fan Control; Temperature Setting - Sharp GB-X18JR Operation Manual

WIRE CONTROLLER OPERATION

ON/OFF

Fan control

(the figures show the relevant display areas)

Temperature setting

GREE_duct_eng_1022.indd 4
• Press the ON/OFF button, the unit will start up.
• Press the ON/OFF button again, the unit will turn off.
• Press FAN button to change fan speed.
Low Medium
In the DRY mode, the fan speed will be automatically
set to Low.
• Press the temperature setting button (
set temperature.
Press the temperature setting button (
set temperature.
(Press the buttons once, the temperature setting will
change by  °C).
NOTE:
Button lock function
When the ( ) and (
simultaneously for 5 seconds, the set temperature
indicating area will display "EE" and all buttons response
will be shut off.
To cancel the button lock function, press the two buttons
simultaneously for 5 second again.
Range of temperature setting:
• Heat: 6 °C~30 °C
• Cool: 6 °C~30 °C
• Dry: 6 °C~30 °C
• Fan: No temperature setting function
E-4
Hight Auto
) to rise the
) to drop the
) buttons are pressed
08.10.27 3:32:04 PM