Choose A Location - Epson PowerLite 822+ Quick Setup Manual

Choose a location

The projector supports 4 viewing setups. Choose the best one for
your environment. If you install the projector in a rear or overhead
position, you'll need to choose the correct projection option,
identified below, from the Extended menu. See the User's Guide
on your CD-ROM for instructions.
The distance between the projector and the screen determines
the size of the image. The diagram below shows approximately
how big your image will be (diagonally), based on where you set up
the projector. (For more help determining the size of your image,
try the Image Size Calculator on the Multimedia Projectors page on
Epson's website.)
Table
Convenient for temporary front projection.
Choose Front from the menu.
Ceiling
Professional installation recommended.
Choose Front/Ceiling from the menu.
Rear
F or installation behind a translucent screen.
Choose Rear from the menu.
Rear/Ceiling
P rofessional installation recommended.
Choose Rear/Ceiling from the menu.
Turn over