Functional Overview; Front Panel; Rear View - Sharp DV-NC100X Operation Manual

FUNCTIONAL OVERVIEW

FRONT PANEL

1
DV-NC100
OPERATE
PULL OPEN
20 19
1. OPERATE
To turn the unit ON or OFF.
The indicator is on when this unit is turned on.
2. Cassette Compartment
3. OPEN/CLOSE (DVD)
To open or close the disc tray.
4. VCR OUTPUT indicator
The indicator is on when this unit is in the VCR mode. Make
sure that this indicator is on before VCR operation.
5. DVD OUTPUT indicator
The indicator is on when this unit is in the DVD mode. Make
sure that this indicator is on before using the DVD player.
6. Disc tray
7. PLAY (DVD)
To begin disc playback.
8. STOP (DVD)
To stop playback.
9. OUTPUT
To select the DVD mode or VCR mode.
10. CHANNEL
To change TV channels.
To adjust the tracking manually during VCR playback
11. Display
12. Remote Sensor

REAR VIEW

21
21. MAIN (AC Power Cord)
Connect to a standard AC plug.
22. OPTICAL DIGITAL AUDIO OUT Jack (DVD Only)
Connect to a compatible Dolby Digital receiver. Use to con-
nect to a Dolby Digital decoder, DTS decoder or MPEG
decoder.
23. COAXIAL DIGITAL AUDIO OUT Jack (DVD Only)
Connect to a compatible Dolby Digital receiver. Use to con-
nect to a Dolby Digital decoder, DTS decoder or MPEG
decoder.
24. AUDIO OUT Jacks (ANALOG Left/Right) (DVD Only)
Connect to the Audio input jacks of A/V-compatible TV
25. S-VIDEO OUT Jack (DVD Only)
Use the S-Video cable to connect this jack to the S-Video
jack on your A/V-compatible TV or wide screen TV for a
higher quality picture.
26. COMPONENT VIDEO OUT Jacks (DVD Only)
Connect optional component video cables here and to the
component Video jacks of TV.
2
STOP/
REW FF EJECT PLAY REC TIMER
18 17 16 15 14 13 12
DVD
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT OUT VIDEO OUT
L
OPTICAL COAXIAL
R
22
23 24 25 26
3 4 5
OPEN/CLOSE
OUTPUT
CH VCR
(TRACKING)
11 10 9
13. TIMER indicator
The indicator is on when the VCR/DVD is in standby mode
for a timer recording or during a One Touch Recording.
14. REC (VCR)
Press once to start recording or repeatedly to start One
Touch Recording.
The indicator is on during recording.
15. PLAY (VCR)
To begin tape playback
16. STOP/EJECT (VCR)
To stop playback.
To eject the tape in the Stop mode.
17. FF (VCR)
To fast forward the tape.
18. REW (VCR)
To rewind the tape.
19. AUDIO IN Jacks (AV2 / VCR only)
Connect audio cables coming from the audio out jacks of a
camcorder, another VCR, or an audio source here.
20. VIDEO IN Jack (AV2 / VCR only)
Connect a cable coming from the video out jack of a cam-
corder, another VCR or an audio-visual so
player, video disc player, etc.) here.
28 30
VCR
DVD/VCR
AUDIO OUT AUDIO IN
Y L L
C R R
B
VIDEO OUT VIDEO IN
C
R
27 29
27. DVD/VCR AUDIO OUT Jacks
Connect the supplied audio cables here and to the Audio In
Jacks of a television or other audio equipment.
28. DVD/VCR VIDEO OUT Jack
Connect the yellow video cable (supplied) here snd to the
TV's Video jack.
29. AUDIO IN Jacks (AV1 / VCR only)
Connect audio cables coming from the audio out jacks of
camcorder, another VCR, or an audio source here.
30. VIDEO IN Jack (AV1 / VCR only)
Connect cable coming from the video out jack of camcorder,
another VCR, or an audio-visual source (laser disc player,
video disc player, etc) here.
31. AERIAL Jack
Connect your antenna, Cable Box, or Direct Broadcast
System.
32. RF OUT Jack
Use the supplied round coaxial cable to connect this jack to
the ANTENNA IN Jack on your TV.
– 7 –
6
DVD STOP PLAY
8 7
31
AERIAL
RF OUT
32
urce (laser disc
EN