Table of Contents
Advertisement
PLAYING A DISC
Time Search
DVD
1
During playback, press DIRECT SKIP repeatedly until the
Time Search screen appears.
2
Within 30 seconds, enter a desired disc time using
numerical buttons.
• Playback will start at the specified time.
• When there is no need to enter a number, "0" appears
automatically. For example, "0:0_:_ _" appears in the
Time Search display if the total time of the disc is less
than 10 minutes.
NOTE:
• Press CLEAR/C-RESET to erase the incorrect input.
Repeat
• REPEAT are available only during playback.
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time
you press the button.
CHAPTER
(current chapter repeat)
CHAPTER
(current chapter repeat) (current title repeat)
NOTES:
• Repeat Title/Chapter is not available with some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time
you press the button.
TRACK
(current track repeat)
NOTES:
• The REPEAT setting will be cleared when moving to
other track.
• Repeat playback does not function during A-B REPEAT
playback.
TRACK
GROUP
(current track repeat) (current group repeat)
CD
DVD-RW
VR mode
TITLE
(current title repeat)
DVD-RW
TITLE
ALL
(entire disc repeat)
CD
ALL
(entire disc repeat)
MP3
ALL
(entire disc repeat)
VCD
without PBC function
1
Press A-B REPEAT at your chosen starting point.
•
A- appears briefly on the TV screen.
2
Press A-B REPEAT again at your chosen end point.
•
A-B appears briefly on the TV screen, and the repeat
sequence begins.
3
To exit the sequence, press A-B REPEAT.
NOTES:
• The A-B REPEAT section can only be set within the
current title (for DVDs), or current track (for audio CDs).
• A-B REPEAT is not available with some scenes in DVD.
• To cancel the A point which was set, press CLEAR/C-
RESET.
• A-B REPEAT playback does not function during title,
chapter, track or all repeat playback.
Programme (CD)
DVD
You may determine the order in which tracks will play.
1
Press MODE (playback
must first be stopped).
• The PROGRAM screen
OFF
(repeat off)
will appear.
Press ▲ or ▼ to select a
2
track, then press ENTER.
• Press CLEAR/C-RESET
to erase the most
VR mode
recently entered programme.
OFF
3
Press PLAY to play the programmed tracks.
(repeat off)
NOTES:
• While the programme is being played back, the STOP
works as follows.
• Press STOP once and then PLAY again, playback will
restart from the point where STOP was pressed.
(Programme continued)
• Press STOP twice and then PLAY. Playback starts
VCD
from the track in the original order. However, the pro-
gramme can be called back when you follow the above
without PBC function
steps. Your programmes will be stored unless either the
disc tray is opened or power is turned off.
• Up to 99 programmes can be entered.
• To erase all tracks in the programme at once, select
OFF
ALL CLEAR at the bottom of the list at step
(repeat off)
• To repeat the current track in the programme, press
REPEAT repeatedly until
playback. If you like to repeat the entire programme
press REPEAT repeatedly until
playback.
• Refer to page 24 for programme playback of MP3 and
JPEG.
JPEG
OFF
(repeat off)
– 22 –
A-B REPEAT
DVD
CD
DVD-RW
VR mode
TRACK appears during
ALL appears during
VCD
CD
0:03:30
2
.
EN
Advertisement
Table of Contents
