Functional Overview; Front Panel; Rear View - Sharp DV-NC100H Operation Manual

FUNCTIONAL OVERVIEW

FRONT PANEL

1
DV-NC100
OPERATE
PULL OPEN
20 19
1. OPERATE
To turn the unit ON or OFF.
The indicator is on when this unit is turned on.
2. Cassette Compartment
3. OPEN/CLOSE (DVD)
To open or close the disc tray.
4. VCR OUTPUT indicator
The indicator is on when this unit is in the VCR mode.
Make sure that this indicator is on before VCR opera-
tion.
5. DVD OUTPUT indicator
The indicator is on when this unit is in the DVD mode.
Make sure that this indicator is on before using the DVD
player.
6. Disc tray
7. PLAY (DVD)
To begin disc playback.
8. STOP (DVD)
To stop playback.
9. OUTPUT
To select the DVD mode or VCR mode.
10. CHANNEL
To change TV channels.
To adjust the tracking manually during VCR playback
11. Display

REAR VIEW

21
21. MAIN (AC power cord)
Connect to a standard AC plug.
22. COAXIAL DIGITAL AUDIO OUT jack (DVD Only)
Connect to a compatible Dolby Digital receiver. Use to
connect to a Dolby Digital decoder, DTS decoder or
MPEG decoder.
23. AUDIO OUT jack (ANALOG Left/Right) (DVD Only)
Connect to the Audio input jacks of A/V-compatible TV
24. S-VIDEO OUT jack (DVD Only)
Use the S-Video cable to connect this jack to the S-
Video jack on your A/V-compatible TV or wide screen
TV for a higher quality picture.
2
STOP/
REW FF EJECT PLAY REC TIMER
18 17 16 15 14 13 12
DVD
DIGITAL ANALOG S-VIDEO
AUDIO OUT AUDIO OUT OUT
L
DVD/VCR
COAXIAL
R
22 23 24
4 5
3
OPEN/CLOSE
OUTPUT
CH VCR
(TRACKING)
10
11 9
12. Remote Sensor
13. TIMER indicator
The indicator is on when the VCR/DVD is in standby
mode for a timer recording or during a One Touch
Recording.
14. REC (VCR)
Press once to start recording or repeatedly to start One
Touch Recording.
The indicator is on during recording.
15. PLAY (VCR)
To begin tape playback
16. STOP/EJECT (VCR)
To stop playback.
To eject the tape in the Stop mode.
17. FF (VCR)
To fast forward the tape.
18. REW (VCR)
To rewind the tape.
19. AUDIO IN AV3 jacks (VCR Only)
Connect audio cables coming from the audio out jacks
of a camcorder, another VCR, or an audio source here.
20. VIDEO IN AV3 jack (VCR Only)
Connect a cable coming from the video out jack of a
camcorder, another VCR or an audio-visual source
(laser disc player, video disc player, etc.) here.
VCR AV2 (DECODER)
AV1 (TV)
25 26
25. EURO AV1 (TV) OUT terminal
Use the scart cable to connect this terminal to the 21
pin scart terminal on your A/V-compatible TV or wide
screen TV for a best quality picture.
26. EURO AV2 (DECODER) terminal (VCR Only)
Use the scart cable to connect this terminal to the 21
pin scart terminal on your decoder.
27. RF OUT jack
Use the supplied round coaxial cable to connect this
jack to the ANTENNA IN jack on your TV.
28. AERIAL jack
Connect your antenna, Cable Box, or Direct Broadcast
System.
– 7 –
6
DVD STOP PLAY
8 7
A E RI A L
R F O UT
27 28
EN