Table of Contents
Advertisement
DVD SETUP
Display Setting
You can change certain aspects of the DVD display screens,
on-screen messages and the display panel on the front of the
VCR/DVD.
1
Press SETUP in STOP mode.
2
Press s or B to select
ENTER.
• On screen menu will appear.
3
Press s or B to select
PLAY), then ENTER to confirm.
4
Press K or L to select the below
items, then press ENTER.
TV ASPECT :
• Press K or L for an item
selection, then press ENTER.
• Select 4:3 LETTER BOX, black bars will appear at top
and bottom of the screen.
• Select 4:3 PAN & SCAN for a full height picture with
both sides trimmed.
PAN & SCAN is only available on DVDs recorded with
this option, if not LETTER BOX mode will be used.
• Select 16:9 WIDE if a wide-screen TV is connected to
the VCR/DVD.
• The default setting is 4:3 LETTER BOX.
• You can also adjust the setting from
menu.
STILL MODE :
• Press K or L for item selection (AUTO, FIELD or
FRAME), then press ENTER.
• This adjusts the resolution of pictures while in the STILL
(PAUSE) mode.
• AUTO is normally selected (default).
• If you select FIELD, pictures in the STILL mode will be
stabilised although they will be coarse due to little
amount of data.
• If you select FRAME, pictures in the STILL mode will be
highly defined although they will be blurred due to out-
put of two fields at the same time.
ANGLE ICON :
• Press ENTER repeatedly to turn Angle icon ON or OFF.
• The default setting is ON.
VIDEO OUT:
• Press ENTER repeatedly to turn video out PAL or AUTO.
• The default setting is PAL.
When playing an NTSC disc
• If you have a PAL TV, select PAL; the modified PAL
signal will be output.
• If you have an NTSC TV or Multi system TV, select
AUTO; the NTSC signal will be output.
5
Press SETUP to exit.
NOTE:
• Be sure to press SETUP, or the setting will not work.
(CUSTOM), then press
(DIS-
DISPLAY
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
ANGLE ICON
ON
VIDEO OUT
PAL
(QUICK) setup
Language Setting
Language options are not available with some discs.
1
Press SETUP in STOP mode.
2
Press s or B to select
ENTER.
• On screen menu will appear.
3
Press s or B to select
GUAGE), then press ENTER to
confirm.
4
Press K or L to select the below
items, then press ENTER.
AUDIO :
• Sets the audio language.
SUBTITLE :
• Sets the subtitle language.
DISC MENU :
• Sets the language for DVD Menu.
PLAYER MENU :
• Sets the language for the On-Screen display.
• You can also adjust the setting from
setup menu.
5
Press K or L to select a setting, then press ENTER.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the
code for the desired language. (Refer to the "language
code list" on the next page.)
• Only the languages supported by the disc can be
selected.
6
Press SETUP to exit.
NOTE:
• Language Setting for Audio and Subtitle is not available
with some discs. Then use AUDIO and SUBTITLE.
(Refer to pages 24 and 25.)
Returning all selections of SETUP
for PARENTAL)
This allows you to return all selections of SETUP (except for
PARENTAL) to their default settings.
1
Press SETUP in STOP mode.
2
Press s or B to select
TIALIZE), then press ENTER.
3
Select YES, then press ENTER to
confirm.
4
Press SETUP to exit.
NOTE:
• When you cancel to initialize at
step
3
, select NO.
– 28 –
(CUSTOM), then press
(LAN-
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
(except
to their default settings
(INI-
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
DTS
MPEG
INITIALIZE
Initialize?
NO
YES
ORIGINAL
OFF
ENGLISH
ENGLISH
(QUICK)
ENGLISH
4:3 LETTER BOX
BITSTREAM
OFF
DPCM
EN
Advertisement
Table of Contents
