Detaching The Monitor Panel; Attaching The Monitor Panel - Kenwood DDX8026BT Instruction Manual

Detaching the monitor panel

Detaching the monitor panel
1 Open the front panel
0
1 sec.
Press the [0] button for longer than 1
second to open the front panel before
turning the ignition off.
⁄
• You can set the front panel to open
automatically when the ignition is turned
off. Refer to <Monitor Angle Control>
(page 73).
2 Detach the monitor panel
1
⁄
• The attaching plate closes automatically
about 10 seconds after the monitor panel is
released. Remove the monitor panel before
this happens.
DDX series DDX8026BT
3
2
4
• It closes automatically when no operation is
done for about a minute.
3 Put the monitor panel in the
protective bag

Attaching the monitor panel

Attaching the monitor panel
Hold the monitor panel securely so as
not to drop it accidentally.
Fit the monitor panel onto the attaching
plate until it is firmly locked.
1
2
3
Basic Operation
1
Next page 3
English 17