Detaching The Monitor Panel - Kenwood DNX9280BT Quick Start Manual

Detaching the monitor panel

1
Open the front panel
0
3 sec.
Press [0] for longer than 3 seconds to
open the front panel before turning the
ignition off.
2
Detach the monitor panel
1
Notes
• The attaching plate closes automatically about
10 seconds after the monitor panel is released.
Remove the monitor panel before this happens.
• It closes automatically when no operation is done
for about a minute.
10 | Quick Start Guide
3
2
4
3
Put the monitor panel in the protective
bag
Attaching the monitor panel
Hold the monitor panel securely so as not
to drop it accidentally.
Fit the monitor panel onto the attaching
plate until it is firmly locked.
1
2
3
1