Radio Listening; Source Control Screen - Kenwood DDX8026BT Instruction Manual

Radio Listening

Various control screens appear in the Tuner Source mode.
• Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller
mode switch> (page 96).

Source Control Screen

Source Control Screen
Switches to the source control screen to
use various functions.
1 Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 18).
2 Operation on the Source Control
screen
1 1 1
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information
function On or Off.
See <Traffic Information> (page 40).
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Tuner Preset List Screen.
See <Preset Select> (page 38).
1 Information display
Selects the Program Service
FM FM
Name, Title & Artist name, Station
name, Radio Text plus, or Radio Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[ ] When
is scrolled by touching it.
DDX series DDX8026BT
appears, the text display
Multi Function
[1/3] Switches the multi function
2 2 2
display.
[ ] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall the stations on
memory.
For memory of broadcasting stations,
see <Auto Memory> (page 38) or
<Manual Memory> (page 39).
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button.
Display
"AUTO1"
"AUTO2"
"MANU"
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 38).
[PTY]
program type. See <Search by Program
Type> (page 40).
[MONO]
reception.
Setting
Tunes in a station with good reception
automatically.
Tunes in stations in memory one after
another.
Switches to the next frequency manually.
Searches station by
FM FM
Select the Monaural
FM FM
Next page 3
English
37