Focusing And Zooming Your Image; Adjusting The Height Of Your Image - Epson PowerLite 703C User Manual

Epson projector user manual

Hide thumbs Also See for PowerLite 703C:

Table of Contents

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.

Use the tab to rotate the lens ring and reduce or enlarge the image.

You can also change the image size by moving the projector closer to

or farther away from the screen. You can use the

the remote control to zoom in on a portion of the image. See page 31

for instructions.

If the image is too low, you can raise it by extending the projector's feet.

1. Stand behind the projector. Pull up the blue foot release levers

and lift the front of the projector. This unlocks the feet.

2. Once the image is positioned where you want it, release the levers

to lock the feet in position.

3. To fine-tune the height of the image, rotate the thumb wheels

attached to the projector's feet.

If the image is no longer square after raising it, see the next section.

lens

ring tab

focus ring

button on

E-Zoom

caution

Do not hold the

projector by the lens;

this can damage it.

Using the Projector

Table of Contents