Replacing The Lamp - Epson PowerLite 703C User Manual

note
You can check to see how
many hours the lamp has
been used. See page 49.
Maintaining and Transporting the Projector
54
4. If you need to replace the filter, use a small screwdriver to pry it
off.
5. To install the new filter, first insert the tab, then press down until
it clicks in place.

Replacing the Lamp

The projection lamp typically lasts for about 1000 hours of use. It is
time to replace the lamp when:
The projection image gets darker or starts to deteriorate.
The lamp warning light
orange.
The message
LAMP REPLACE
lamp comes on (after about 900 hours of use). To maintain
projector brightness and image quality, replace the lamp as soon
as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the United
States and Canada for a replacement lamp. Request part number
.
ELPLP14
is red, flashing red, or flashing
appears on the screen when the