Turning On Your Equipment; Turning On The Projector - Epson PowerLite 703C User Manual

Epson projector user manual

Hide thumbs Also See for PowerLite 703C:

Table of Contents

Using the Projector

Turning On Your Equipment

Make sure your projector and other equipment are set up and

connected correctly, as described in Chapter 1 or Appendix A. Then

turn on your projector, as described below, followed by any

equipment you've connected to it. You can turn on your computer

and video equipment in any order, but if you have both a computer

and video source connected, you may have to switch to the desired

source as described on page 20.

Follow these steps to plug in and turn on the projector:

1. Connect one end of the power cord to the projector's power inlet.

2. Connect the other end to a grounded electrical outlet.

The power light on top of the projector turns orange, indicating

that the projector is receiving power but not yet turned on.

3. Use the tab on the lens ring to rotate the ring and extend the lens.

power light

tab

Table of Contents