Connecting To Video Sources; Connecting The Rca Av Cable - Epson PowerLite 703C User Manual

Connecting to Video Sources

You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
The projector supports NTSC, PAL, and SECAM, and automatically
detects the video format.
A standard RCA A/V cable is included with the
projector. If your video source also has an S-video
jack (as shown with an S-video plug at the right),
you can use it to provide a higher quality video image. However,
you'll need an S-video cable, which may be included with your video
source, or may be purchased from an electronics store or video dealer.
Follow the instructions below for your type of connection.

Connecting the RCA AV Cable

Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Connect the yellow plug on one end of the AV cable to the
projector's yellow
Video
2. Connect the other end of the cable to the video-out jack on your
video source.
Video jack
jack.
1 2
note
3 4
The projector does not
support TV antenna cable
F connectors.
RCA AV cable
Setting Up the Projector
15