Page 1 PowerLite 700U User's Guide...
Page 3: Table Of Contents
Contents PowerLite 700U User's Guide........................11 Introduction to Your Projector ......................... 12 Projector Features..........................12 Product Box Contents........................13 Additional Components ........................ 14 Optional Equipment and Replacement Parts................. 15 Warranty and Registration Information ..................16 Notations Used in the Documentation ....................16 Where to Go for Additional Information ....................
Page 4 Connecting to an MHL-Compatible Device ................41 Connecting to a Component Video Source ................42 Connecting to a Composite Video Source ................43 Connecting to a Video Source for Sound .................. 44 Connecting External Output Devices..................... 45 Connecting to an External Computer Monitor ................45 Connecting to External Speakers....................
Page 5 Controlling a Networked Projector Using Crestron RoomView ............81 Registering a Digital Certificate on the Projector ................82 Importing a Web Server Certificate Using the Projector Menus............. 82 Registering Digital Certificates from a Web Browser ..............84 Digital Certificate Types......................... 85 Using Basic Projector Features .......................
Page 6 Controlling the Volume with the Volume Buttons................116 Projecting a PC Free Presentation ....................117 Supported PC Free File Types ....................117 Starting a PC Free Slide Show ....................118 Starting a PC Free Movie Presentation ..................120 PC Free Display Options ......................122 Adjusting Projector Features .........................
Page 7 Creating a User Pattern to Display ....................153 Copying Menu Settings Between Projectors ..................154 Saving Settings to a USB Flash Drive..................155 Transferring Settings from a USB Flash Drive ................156 Saving Settings to a Computer ....................158 Transferring Settings from a Computer ..................159 Adjusting the Menu Settings ........................
Page 8 Solutions When Image is Incorrect Using the USB Display Function .......... 205 Solutions When "No Signal" Message Appears................205 Displaying From a PC Laptop ....................206 Displaying From a Mac Laptop ....................207 Solutions When "Not Supported" Message Appears ..............207 Solutions When Only a Partial Image Appears ................
Page 9 Important Safety Information ......................226 Laser Safety Information ........................227 Important Safety Instructions......................229 Restriction of Use ........................231 List of Safety Symbols (corresponding to IEC60950-1 A2)............... 232 FCC Compliance Statement......................235 Binding Arbitration and Class Waiver ....................236 Trademarks ............................239 Copyright Notice..........................
Page 11: Powerlite 700U User's Guide
PowerLite 700U User's Guide Welcome to the PowerLite 700U User's Guide. For a printable PDF copy of this guide, click here.
Page 12: Introduction To Your Projector
• Use Epson iProjection (Windows/Mac) to simultaneously project up to four images from network computers or mobile devices using the Epson iProjection app • Projection from iOS or Android devices with the optional wireless LAN module and free Epson iProjection app; visit epson.com/iprojection...
Page 13: Product Box Contents
• Built-in closed captioning decoder • Powerful 16 W speaker system with audio out port for connecting external speakers • Epson's Direct Power On and Auto Power On features for quick and easy setup • Support for Crestron RoomView network monitoring systems •...
Page 14: Additional Components
This allows you to mirror your smartphone or tablet screens, watch movies, and more. Contact your device manufacturer for compatible adapter options. Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information.
Page 15: Optional Equipment And Replacement Parts
Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com...
Page 16: Warranty And Registration Information
In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details.
Page 17: Additional Projector Software And Manuals
You can install the projector software programs listed here and view their manuals for instructions on using them. Note: If you still need help after checking this manual and the sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Projector software Manual...
Page 18: Projector Part Locations
(U.S.) or epson.ca/iprojection (Canada) for more information. — Open Source Software You can download this document from the License Epson web site. Go to epson.com/support (U.S.) or epson.ca/support (Canada) and select your projector. Parent topic: Introduction to Your Projector Projector Part Locations Check the projector part illustrations to learn about the parts on your projector.
Page 19: Projector Parts - Front/Side
Projector Parts - Front/Side Remote control receiver Status lights Speaker Exhaust vent Cable cover screws Cable cover...
Page 20: Projector Parts - Top/Side
Parent topic: Projector Part Locations Projector Parts - Top/Side Air filter cover latch Wireless LAN light Obstacle sensors Remote receiver Projection window Control panel...
Page 21 Security cable installation slot Air filter cover Focus lever Air intake vent (air filter) Parent topic: Projector Part Locations Related references Projector Light Status...
Page 22: Projector Parts - Back Panel
Projector Parts - Back Panel Monitor Out port Video port Audio port for use with the Video port Audio Out port Audio port for use with the Computer port...
Page 23 Power inlet HDMI 1/MHL port HDMI 2 port HDMI 3 port Network (LAN) port USB-B port for computer connection USB-A ports for USB memory device or document camera Computer port RS-232C port Wireless LAN module port Parent topic: Projector Part Locations Related concepts Projector Connections...
Page 24: Projector Parts - Base
Projector Parts - Base Ceiling mount holes (4) Rear foot holes (2) Security cable attachment point Wall mounting plate holes (4) Front foot hole Parent topic: Projector Part Locations...
Page 25: Projector Parts - Control Panel
Projector Parts - Control Panel Source Search button (searches for connected video sources) (Enter) button (selects options) Vertical keystone adjustment buttons (display the adjustment screen and adjust screen shape) and arrow buttons Esc button (cancels/exits functions) W/T (Wide/Tele) buttons (adjust projected image size) and arrow buttons Menu button (accesses projector menu system) Home button (accesses projector Home screen) Power button...
Page 26: Projector Parts - Remote Control
Projector Parts - Remote Control...
Page 27 Power button Computer button HDMI/Video button (cycles through connected HDMI and video sources) Numeric buttons Auto button (automatically adjusts position, tracking, and sync settings) Aspect button (selects the image aspect ratio) Num button (when held down, switches numeric buttons to number function) Menu button (accesses projector menu system) Arrow buttons (move through on-screen options and control wireless mouse functions) Enter button (selects options and controls wireless mouse functions)
Page 28 Source Search button (searches for connected sources) Remote control emitter Parent topic: Projector Part Locations...
Page 29: Setting Up The Projector
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Removing and Attaching the Cable Cover Projector Connections Installing Batteries in the Remote Control Projector Placement Your ultra-short throw projector is designed to be installed on a wall (with a wall mount). You can also place the projector on a flat surface such as a desk or table to project in a portable setup.
Page 30 Mounted on the wall or ceiling Mounted on the wall or ceiling and projecting from behind a translucent screen Front projection from a table or portable cart...
Page 31: Projection Distance
Rear projection from a table or portable cart behind a translucent screen Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an angle. If you project from a table or portable cart, or from the rear, be sure to select the correct Projection option in the projector's menu system.
Page 32 You can also use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean). Projection distance Distance from the top of the projector to the top of the image (when projecting from a wall or table mount) or base of the image (when projecting from a flat surface) Distance from the top of the projector to the base of the image (when projecting from a wall or table mount) or top of the image (when projecting from a flat surface) Distance from the center of the lens to the rear of the projector: 13.7 inches (34.9 cm)
Page 33 16:10 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center Offset from lens center Wide to Tele 70 inches (177.8 cm) 15.9 to 22 inches 5.1 inches (12.9 cm) 42.2 inches (107.2 cm) (40.5 to 55.8 cm) 75 inches (190.5 cm) 17.1 to 23.6 inches...
Page 34: Removing And Attaching The Cable Cover
*Wide resolution only 16:9 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center Offset from lens center Wide to Tele 70 inches (177.8 cm) 16.4 to 22.6 inches 7.2 inches (18.3 cm) 41.5 inches (105.5 cm) (41.7 to 57.5 cm) 80 inches (203.2 cm) 18.9 to 26 inches...
Page 35: Projector Connections
1. Use a screwdriver to remove both of the cable cover screws. 2. Slide off the cable cover. To attach the cable cover, slide it into position and tighten the screws with a screwdriver. Parent topic: Setting Up the Projector Projector Connections See these sections to connect the projector to a variety of projection sources.
Page 36: Connecting To Computer Sources
Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly. Connecting to Computer Sources Connecting to Video Sources Connecting External Output Devices Connecting to External USB Devices Connecting to a Document Camera Parent topic:...
Page 37: Connecting To A Computer For Vga Video And Audio
• Windows 10/Windows 8.x: Click EPSON_PJ_UD in the upper right-corner, then select Run EMP_UDSE.exe in the dialog box that appears to install the Epson USB Display software. • Windows 7/Windows Vista: Select Run EMP_UDSE.exe in the dialog box that appears to install the Epson USB Display software.
Page 38: Connecting To A Computer For Hdmi Video And Audio
Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options. 1.
Page 39: Connecting To A Computer For Sound
(Make sure the HDMI audio playback device on your computer's audio settings is set to EPSON PJ.) Note: If you have problems hearing audio through the HDMI connection, you can use one of the projector's audio ports instead to play sound.
Page 40: Connecting To Video Sources
2. Connect the other end to the Audio port that corresponds to the Computer port you are using. Parent topic: Connecting to Computer Sources Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Connecting to an HDMI Video Source Connecting to an MHL-Compatible Device Connecting to a Component Video Source...
Page 41: Connecting To An Mhl-Compatible Device
2. Connect the other end to one of the projector's HDMI ports. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers. Note: If you have problems hearing audio through the HDMI connection, you can use one of the projector's audio ports instead to play sound.
Page 42: Connecting To A Component Video Source
2. If you are using an MHL adapter, connect it to an MHL-compatible HDMI cable. 3. Connect the other end of the cable to the projector's HDMI 1/MHL port. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
Page 43: Connecting To A Composite Video Source
2. Connect the VGA connector to the Computer port on the projector. 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources Related references...
Page 44: Connecting To A Video Source For Sound
2. Connect the other end to the projector's Video port. Parent topic: Connecting to Video Sources Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. If you are projecting video using the Video or Computer port, connect the projector to the video source using an optional stereo mini-jack audio cable.
Page 45: Connecting External Output Devices
2. Connect the other end of the cable to the projector's Audio port that corresponds to the port you are using for video. Parent topic: Connecting to Video Sources Connecting External Output Devices See these sections to connect the projector to external output devices. Connecting to an External Computer Monitor Connecting to External Speakers Parent topic:...
Page 46: Connecting To External Speakers
2. Connect the external monitor's cable to your projector's Monitor Out port. Parent topic: Connecting External Output Devices Connecting to External Speakers To enhance the sound from your presentation, you can connect the projector to external self-powered speakers. You can control the volume using the projector's remote control. You can also connect the projector to an amplifier with speakers.
Page 47: Connecting To External Usb Devices
4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port. Parent topic: Connecting External Output Devices Related references Projector Setup Settings - Extended Menu Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector. USB Device Projection Connecting a USB Device or Camera to the Projector Selecting the Connected USB Source...
Page 48: Connecting A Usb Device Or Camera To The Projector
• USB hard drive • Multimedia storage viewer Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class-compliant. Note: USB hard drives must meet these requirements: • USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported) •...
Page 49: Selecting The Connected Usb Source
2. Connect the USB cable (or USB flash drive) to the projector's USB-A port. Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly. 3. Connect the other end of the cable (if applicable) to your device. Parent topic: Connecting to External USB Devices Related tasks...
Page 50: Disconnecting A Usb Device Or Camera From The Projector
USB-A port and to the document camera's USB Type B port. • For the Epson DC-11 document camera, connect it to the projector's Computer or Video port and to the corresponding port on the document camera. See the document camera manual for details.
Page 51: Installing Batteries In The Remote Control
• For the Epson DC-21 document camera, connect it to the projector's HDMI, Computer, or Video port and to the corresponding port on the document camera. See the document camera manual for details. Note: For additional features supported by software, connect your document camera to your computer instead of the projector.
Page 52 2. Insert the batteries with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Page 53: Using The Projector On A Network
Note: If your projector is connected via a LAN (Ethernet) cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the Epson network software.
Page 54: Selecting Wired Network Settings
2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port.
Page 55 3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
Page 56 • Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the Remote or Basic Control screen in Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.) • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web.
Page 57: Wireless Network Projection
You can project over a wireless network. To do this, you must set up your projector and computer for wireless projection. Note: The Epson 802.11b/g/n wireless LAN module is not included with your projector and is optional. To connect wirelessly to your projector, configure the connection using the projector's Network menus.
Page 58: Installing The Wireless Lan Module
Optional Equipment and Replacement Parts Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless module in the projector. Do not install any other type of wireless module. Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting wirelessly.
Page 59 2. Unscrew and remove the cable cover if it is attached (screwdriver not included).
Page 60: Connecting Directly To A Smartphone Or Tablet
You can display a QR code on the screen and use it to connect a single smartphone or tablet to your projector with the Epson iProjection app. 1. Download the latest version of the Epson iProjection app from the App Store or Google Play and install it on your smartphone or tablet.
Page 61 3. Select the Network menu and press Enter. 4. Select On as the Wireless LAN Power setting, if necessary. 5. Select Network Configuration and press Enter. 6. Select the Wireless LAN menu and press Enter. 7. Select Connection Mode and press Enter. 8.
Page 62 Your projector displays a QR code on the projection surface. 12. Open the Epson iProjection app on your smartphone or tablet. 13. Use the QR code reader feature to read the QR code and connect your device to the projector.
Page 63: Using Quick Wireless Connection (Windows)
Then you can project your presentation and remove the key when you are done. Note: A USB flash drive is not included with your projector. 1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection (Windows/Mac) software.
Page 64: Selecting Wireless Network Settings Manually
Note: In Windows Vista, if you see the AutoPlay window, select Run MPPLaunch.exe, then select Allow on the next screen. 9. Follow the on-screen instructions to install the Epson iProjection (Windows/Mac) software. Note: If you see a Windows Firewall message, click Yes to disable the firewall. You need administrator authority to install the software.
Page 65 3. Select the Network menu and press Enter. 4. Make sure the Wireless LAN Power setting is set to On. 5. Select Network Configuration and press Enter. 6. Select the Basic menu and press Enter. 7. Select the following basic options as necessary: •...
Page 66 PJLink protocol for projector control. • Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the Remote or Basic Control screen in the Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.) •...
Page 67 8. Select the Wireless LAN menu and press Enter. 9. Select the settings on the Wireless LAN menu as necessary for your network. 10. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Note: Check your network security settings after completing the wireless settings.
Page 68: Wireless Lan Menu Settings
Wireless LAN Menu Settings Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick: lets you directly connect to multiple devices and computers using the projector's wireless network (requires the optional wireless LAN module). Advanced: lets you connect to multiple devices and computers via a wireless network access point...
Page 69 Setting Options Description Security Open Selects the type of security used on the wireless network WPA2-PSK WPA2-PSK: uses WPA2 security WPA/WPA2-PSK with AES for encryption. Use the WPA2-EAP Passphrase value to establish a connection from a computer WPA/WPA2-EAP WPA/WPA2-PSK: uses WPA personal mode;...
Page 70: Selecting Wireless Network Settings In Windows
Setting Options Description Channel In Quick connection mode, selects the frequency band (channel) used by the wireless 11ch IP Settings DHCP (On or Off) Selects DHCP if your network assigns IP addresses IP Address automatically, or turns off DHCP Subnet Mask so you can enter the network's IP address, subnet mask, and Gateway Address...
Page 71: Setting Up Wireless Network Security
2. Make sure AirPort is turned on, then do one of the following: • If your projector is set up on an existing network (Advanced mode), select the network name (SSID). • If your projector is configured for Quick mode, select the projector's SSID. Parent topic: Wireless Network Projection Setting Up Wireless Network Security...
Page 72: Setting Up Projector Network E-Mail Alerts
4. Select Network Configuration and press Enter. 5. Select the Wireless LAN menu and press Enter. 6. Select the Security setting and press Enter. 7. Select the security settings for your network. 8. When you finished, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Page 73: Network Projector E-Mail Alert Messages
• The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector •...
Page 74: Setting Up Monitoring Using Snmp
Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring. 1. Press the Menu button. 2.
Page 75 Control4 SDDP setting. 13. If you want this projector to receive broadcast messages over the network, turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using the Epson Projector Management software. 14. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Page 76: Controlling A Networked Projector Using A Web Browser
Controlling a Networked Projector Using a Web Browser Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely. Note: The web setup and control features support Microsoft Internet Explorer 11.0 or later, Microsoft Edge, Google Chrome, and Safari on networks that do not use a proxy server for connection.
Page 77 You see the Web Control screen. 4. To control projection remotely, select the Basic Control option from the Web Control screen. Note: If you see a log in window, enter your user name and password. (The default user name is EPSONREMOTE and the default password is guest.)
Page 78 You see a screen like this: Power button control Selects an HDMI port source Selects a Video port source Selects the USB Display source Selects the network source A/V Mute button control...
Page 79: Crestron Roomview Support
Crestron RoomView lets you control and monitor your projector using a web browser. Note: You cannot use the Epson Web Control feature or the Message Broadcasting tool for Epson Projector Management when you use Crestron RoomView.
Page 80: Setting Up Crestron Roomview Support
4. Select the Others menu and press Enter. 5. Set the Crestron RoomView setting to On to allow the projector to be detected. Note: Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the Epson Projector Management software. 6. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Page 81: Controlling A Networked Projector Using Crestron Roomview
Parent topic: Crestron RoomView Support Related references Projector Setup Settings - ECO Menu Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1.
Page 82: Registering A Digital Certificate On The Projector
6. To change projector, Crestron, and password settings, click the Tools tab, select settings on the displayed screen, and click Send. 7. When you finish selecting settings, click Exit to exit the program. Parent topic: Crestron RoomView Support Registering a Digital Certificate on the Projector Follow the instructions here if you need to install a digital certificate on the projector to provide security for your presentation files.
Page 83 3. Select the Network menu and press Enter. 4. Select the Network Configuration setting and press Enter. 5. Select the Others menu and press Enter. 6. Select On as the Secure HTTP setting. 7. Select the Web Server Cert. setting and press Enter. 8.
Page 84: Registering Digital Certificates From A Web Browser
10. Press Enter to display the certificate list. 11. Select the certificate you want to import from the displayed list. A message is displayed prompting you to enter the password for the certificate. 12. Enter the password and press Enter. The certificate is imported and a completion message appears.
Page 85: Digital Certificate Types
You see a screen like this: 8. Select the certificate file you want to register. 9. Enter a password in the Password box, then click Send. 10. When you finish registering the certificate, click Apply to finalize your changes and complete the registration.
Page 86 Specification Description Encryption Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512 Key length 512/1024/2048/4096 bit Password Up to 32 alphanumeric characters; required CA Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-Fast) Specification Description Format X509v3 Extension DER/CER/PEM Encryption Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512 Key length 512/1024/2048/4096 bit Encoding BASE64/Binary Web Server Certificate (Secure HTTP) Specification Description Format PKCS#12...
Page 87: Using Basic Projector Features
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Setting the Date and Time Image Shape Adjusting the Image Height Resizing the Image with the Wide and Tele Buttons Adjusting the Image Position Focusing the Image...
Page 88 1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3.
Page 89: Using The Home Screen
Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the lens for an extended time can melt and light that is reflected back into the lens can cause the projector to malfunction. If you do not see a projected image right away, try the following: •...
Page 90 2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press Enter to select an option. Selects the source you want to project Displays a QR code for device connection Displays the on-screen help Hides the Home screen Displays the settings assigned to Home screen in the projector's Extended menu Projects two images from different image sources simultaneously by splitting the projected...
Page 91: Turning Off The Projector
2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the laser turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary).
Page 92: Selecting The Language For The Projector Menus
3. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Caution: To avoid damaging the projector or laser, never unplug the power cord when the Status light is on or flashing. Parent topic: Using Basic Projector Features Related references...
Page 93: Setting The Date And Time
3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Setting the Date and Time You can set the date and time for the projector.
Page 94: Image Shape
You see a screen like this: 5. Select the Date & Time setting and press Enter. 6. Select your date and time settings. Then select Set and press Enter to confirm your changes. 7. When you are finished, press the Menu button to exit. Parent topic: Using Basic Projector Features Image Shape...
Page 95 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen.
Page 96 3. Press a keystone button on the projector's control panel to adjust the image shape. Note: The horizontal keystone adjustment buttons are labeled W and T. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the H/V-Keystone settings in the projector menus.
Page 97: Correcting Image Shape With Quick Corner
Related references Projector Feature Settings - Settings Menu Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. Note: If the projector is mounted on the wall, use the adjustment dials on the wall mount to correct the screen image before using any other digital correction methods.
Page 98 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5. Select the Quick Corner setting and press Enter. Then press Enter again. You see the Quick Corner adjustment screen: Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen.
Page 99: Correcting Image Shape With Arc Correction
6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area selection screen.
Page 100: Adjusting The Image Height
4. Select the Geometry Correction setting and press Enter. 5. Select the Arc Correction setting and press Enter. Then select the Arc Correction setting and press Enter again. You see the Arc Correction adjustment screen: Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset screen, and select Yes.
Page 101 1. Attach the projector feet. 2. Turn on the projector and display an image. 3. To adjust the image height, rotate the front and rear feet to extend or retract them. 4. If the image is tilted, rotate the rear feet to adjust their height.
Page 102: Resizing The Image With The Wide And Tele Buttons
If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related references Product Box Contents Resizing the Image with the Wide and Tele Buttons You can resize the image using the Wide and Tele buttons. 1.
Page 103: Adjusting The Image Position
Adjusting the Image Position You can use the Image Shift feature to adjust the image position without moving the projector. Note: This feature is not available if the Zoom option is set to the widest setting. 1. Turn on the projector and display an image. 2.
Page 104: Focusing The Image
Related references Projector Feature Settings - Settings Menu Focusing the Image 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. Slide the air filter cover latch and open the air filter cover.
Page 105: Remote Control Operation
3. Raise or lower the focus lever to sharpen the image. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away.
Page 106 Make sure that you aim the remote control at the projector's receivers within the angles listed here. 19.7 feet (6 m) ± 30° ± 55° 60° 15° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands.
Page 107: Using The Remote Control As A Wireless Mouse
Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can control projection at a distance from the computer. The computer must be running Windows Vista or later, OS X 10.7 or later, macOS 10.12.x, or macOS 10.13.x.
Page 108: Using The Remote Control As A Pointer
• To drag-and-drop, hold the button as you move the cursor with the arrow buttons, then release button at the destination. Note: If the mouse button settings are set to reverse on the computer, the remote control buttons will also be reversed. Parent topic: Remote Control Operation Related references...
Page 109: Selecting An Image Source
Parent topic: Remote Control Operation Related references Projector Feature Settings - Settings Menu Selecting an Image Source If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other. 1.
Page 110: Projection Modes
• Press the Home button on the remote control and select your image source. Parent topic: Using Basic Projector Features Related references Projector Setup Settings - Extended Menu Related tasks Using the Home Screen Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.
Page 111: Changing The Projection Mode Using The Remote Control
You can change the projection mode using the remote control or by changing the Projection setting in the Extended menu. Changing the Projection Mode Using the Remote Control Changing the Projection Mode Using the Menus Parent topic: Using Basic Projector Features Changing the Projection Mode Using the Remote Control You can change the projection mode to flip the image over top-to-bottom.
Page 112: Image Aspect Ratio
3. Select the Extended menu and press Enter. 4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios.
Page 113: Available Image Aspect Ratios
2. Press the Aspect button on the remote control. The shape and size of the displayed image changes, and the name of the aspect ratio appears briefly on the screen. 3. To cycle through the available aspect ratios for your input signal, press the Aspect button repeatedly.
Page 114: Color Mode
Aspect ratio setting Description Full Displays images using the full width of the projection area, but does not maintain the aspect ratio. Zoom Displays images using the full width of the projection area and maintains the aspect ratio of the image. Native Displays images as is (aspect ratio and resolution are maintained).
Page 115: Available Color Modes
3. Press the Color Mode button on the remote control to change the Color Mode. The image appearance changes and the name of the Color Mode appears briefly on the screen. 4. To cycle through all the available Color Modes for your input signal, press the Color Mode button repeatedly.
Page 116: Turning On Automatic Luminance Adjustment
Turning On Automatic Luminance Adjustment In the Dynamic and Cinema color modes, you can turn on the Dynamic Contrast setting to automatically optimize the image luminance. This improves the image contrast based on the brightness of the content you project. 1.
Page 117: Projecting A Pc Free Presentation
You must adjust the volume separately for each connected input source. 1. Turn on the projector and start a presentation that includes audio. 2. To lower or raise the volume, press the Volume buttons on the remote control. A volume gauge appears on the screen. 3.
Page 118: Starting A Pc Free Slide Show
File type and Details extension Image (.jpg) Make sure the file is not: • CMYK format • Progressive format • Highly compressed • Above 8192 × 8192 resolution Image (.bmp) Make sure the file resolution is not above 1280 × 800 Image (.gif ) Make sure the file is not: •...
Page 119 The PC Free screen appears. Note: If the Select Drive screen appears, press the arrow buttons to select the drive and press Enter. 3. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button.
Page 120: Starting A Pc Free Movie Presentation
• To display a slide show of all the images in a folder, press the arrow buttons to highlight the Slideshow option at the bottom of the screen and press Enter. Note: If any file names are longer than 8 characters or include unsupported symbols, the file names may be shortened or changed only in the screen display.
Page 121 The PC Free screen appears. Note: If the Select Drive screen appears, press the arrow buttons to select the drive and press Enter. 3. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button.
Page 122: Pc Free Display Options
5. To stop movie playback, press the Esc button, highlight Exit, and press Enter. 6. Turn off the USB device, if necessary, and then disconnect the device from the projector. Parent topic: Projecting a PC Free Presentation PC Free Display Options You can select these display options when using the projector's PC Free feature.
Page 123 Setting Options Description Effect Wipe Transitions between images with a wipe effect Dissolve Transitions between images with a dissolve effect Random Transitions between images using a random variety of effects Parent topic: Projecting a PC Free Presentation...
Page 124: Adjusting Projector Features
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Projecting Two Images Simultaneously Using Multiple Projectors Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Scheduling Projector Events Projector Security Features Creating a User Pattern to Display Copying Menu Settings Between Projectors...
Page 125: Projecting Two Images Simultaneously
Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images from different image sources next to each other. You can control the split screen feature using the remote control or the projector menus. Note: While you use the split screen feature, other projector features may not be available and some settings may be automatically applied to both images.
Page 126 1. Press the Split button on the remote control. The currently selected input source moves to the left side of the screen. 2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter, select the input source, select Execute, and press Enter.
Page 127: Input Sources For Split Screen Projection
6. To choose the audio you want to hear, select the Audio Source setting, press Enter, select an audio option, press Enter, and press Menu to exit. 7. To align the projected images, select the Align setting, press Enter, select the setting, press Enter, and press Menu to exit.
Page 128: Projector Identification System For Multiple Projector Control
Projector Identification System for Multiple Projector Control Adjusting Color Uniformity Adjusting the Projector's Brightness Level Matching the Image Colors Adjusting RGBCMY Parent topic: Adjusting Projector Features Projector Identification System for Multiple Projector Control You can operate multiple projectors using one remote control for more elaborate presentations. To do this, you assign an identification number to each projector and to the remote control.
Page 129: Setting The Remote Control Id
5. Press the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter. Repeat these steps for all the other projectors you want to operate from one remote control. Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button to temporarily display the projector's ID on the screen.
Page 130: Adjusting Color Uniformity
5. Press the ID button on the remote control to check if the ID-setting process worked. You see a message displayed by the projector. • If the remote control is listed as On, the remote control ID is set to operate only the listed projector. •...
Page 131 2. Select the Multi-Projection setting and press Enter. 3. Select the Color Uniformity setting and press Enter. 4. Select On as the Color Uniformity setting and press Enter, then press Esc. 5. Select Adjustment Level and press Enter. 6. Select an adjustment level and press Esc. 7.
Page 132: Adjusting The Projector's Brightness Level
8. Select the area you want to adjust and press Enter. 9. Select Red, Green, or Blue and press the left arrow button to weaken the color tone or the right arrow button to strengthen the color tone. Note: The adjustment screen changes each time you press Enter. 10.
Page 133 2. Press the Menu button. 3. Select the ECO menu and press Enter. 4. Select Brightness Settings and press Enter. 5. Select Normal for the Light Source Mode setting and press Esc. Note: If you have set Multi-Projection to On, you cannot change the Light Source Mode setting. 6.
Page 134: Matching The Image Colors
8. Select On and press Esc. 9. Select Brightness Settings and press Enter. 10. Select the Brightness Level setting and press Enter. 11. Use the left and right arrow buttons on the remote control to adjust the brightness level. 12. Press Esc to return to the previous screen. Parent topic: Using Multiple Projectors Matching the Image Colors...
Page 135 2. Select the Extended menu and press Enter. 3. Select the Multi-Projection setting and press Enter. 4. Select the Color Matching setting and press Enter.
Page 136: Adjusting Rgbcmy
You see this screen: 5. Press the left or right arrow buttons to select a value for the Adjustment Level setting. Note: There are several adjustment levels and you can adjust each level individually. 6. Press the left or right arrow buttons to adjust the color tone for the Red, Green, and Blue settings. 7.
Page 137 2. Select the Extended menu and press Enter. 3. Select the Multi-Projection setting and press Enter.
Page 138 4. Select the RGBCMY setting and press Enter. 5. Select the color you want to adjust and press Enter. You see this screen: • To adjust the overall hue of the color, adjust the Hue setting. • To adjust the overall vividness of the color, adjust the Saturation setting. •...
Page 139: Shutting Off The Picture And Sound Temporarily
Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
Page 140: Zooming Into And Out Of Images
2. To restart the video action in progress, press Freeze again. Parent topic: Adjusting Projector Features Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen.
Page 141: Scheduling Projector Events
Scheduling Projector Events You can save a projector command, such as turning the projector on or off or switching input sources, as an "event". You can schedule when you want the projector to automatically execute the command. Note: The Schedule Protection setting in the Password Protection menu must be turned off to schedule an event.
Page 142: Viewing Scheduled Events
You see a screen like this: 7. In the Event Settings section, select the events you want to have occur. (Select No Change for events that you do not want to occur.) 8. In the Date/Time Settings section, set the date and time for the scheduled events to occur. 9.
Page 143: Editing A Scheduled Event
4. Select Schedule and press Enter. You see a screen like this: Colored boxes on the calendar indicate the following: One-time event Repeating event Communication is on or off Event is invalid 5. To view an event, press the left and right arrow buttons on the remote to select a day. The screen displays the details of the events scheduled for that day.
Page 144: Projector Security Features
You see a screen like this: 4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled event you want to edit. 5. Press the up or down arrow buttons to highlight the event you want to edit, and press Esc. 6.
Page 145: Password Security Types
• Security cabling to physically cable the projector in place. Password Security Types Locking the Projector's Buttons Installing a Security Cable Parent topic: Adjusting Projector Features Password Security Types You can set up these types of password security using one shared password: •...
Page 146 1. Hold down the Freeze button on the remote control for about five seconds or until you see this menu. 2. Press the down arrow to select Password and press Enter. You see the prompt "Change the password?". 3. Select Yes and press Enter. 4.
Page 147: Selecting Password Security Types
7. Make a note of the password and keep it in a safe place in case you forget it. Parent topic: Password Security Types Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want to use.
Page 148: Entering A Password To Use The Projector
Entering a Password to Use the Projector If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a password whenever you turn on the projector. You must enter the correct password to use the projector. 1.
Page 149: Saving A User's Logo Image To Display
• If you continue to enter an incorrect password many times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the password again. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.
Page 150 2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter. You see a selection box overlaying your image.
Page 151: Locking The Projector's Buttons
You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. You see a completion message. 9.
Page 152: Unlocking The Projector's Buttons
Note: The projector can still be operated using the remote control. 1. Press the Menu button. 2. Select the Settings menu and press Enter. 3. Select Lock Setting and press Enter. 4. Select the Control Panel Lock setting and press Enter. 5.
Page 153: Installing A Security Cable
Related references Projector Feature Settings - Settings Menu Installing a Security Cable You can install two types of security cables on the projector to deter theft. • Use the security slot on the projector to attach a Kensington lock. See your local computer or electronics dealer for purchase information.
Page 154: Copying Menu Settings Between Projectors
2. Press the Menu button, select the Settings menu, and press Enter. 3. Select the Pattern setting and press Enter. 4. Select the User Pattern setting and press Enter. You see a prompt asking if you want to use the displayed image as a User Pattern. Note: When you select User Pattern, adjustments such as Keystone, E-Zoom, Aspect, Adjust Zoom, or Image Shift are temporarily canceled.
Page 155: Saving Settings To A Usb Flash Drive
Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector. Caution: If the copy process fails due to a power failure, communication error, or for any other reason, Epson will not be responsible for any repair costs incurred. The following settings will not transfer between projectors: •...
Page 156: Transferring Settings From A Usb Flash Drive
2. Insert the flash drive into the USB-A port. Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly. 3. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 157 Note: Make sure the USB flash drive contains only a single settings transfer from another projector of the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other files, the transfer may not complete correctly. Do not adjust image settings on a projector until after you transfer settings to it.
Page 158: Saving Settings To A Computer
Saving Settings to a Computer You can save the projector settings you want to transfer to a computer. Your computer must be running one of the following operating systems: • Windows Vista • Windows 7 • Windows 8.x • Windows 10 •...
Page 159: Transferring Settings From A Computer
4. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet. 5. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release the Esc button.
Page 160 1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Connect a USB cable to your projector's USB-B port. 3. Connect the other end to any available USB port on your computer. 4. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 161 Parent topic: Copying Menu Settings Between Projectors...
Page 162: Adjusting The Menu Settings
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Network Settings - Network Menu Projector Setup Settings - ECO Menu...
Page 163 You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3.
Page 164: Image Quality Settings - Image Menu
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description...
Page 165 Setting Options Description White Balance Color Temp. Sets the overall color tone of the image G-M Correction Color Temp.: sets the color Customized temperature according to the selected color mode; lower values tint the image red, and higher values tint the image blue G-M Correction: makes fine adjustments to the color tone;...
Page 166 Setting Options Description Advanced Gamma Gamma: adjusts the colors by selecting one of the gamma RGBCMY correction values, referring to the Deinterlacing projected image, or a gamma graph RGBCMY: adjusts the hue, saturation, and brightness for each color Deinterlacing: sets whether to convert interlaced-to-progressive signals for certain video image types...
Page 167: Input Signal Settings - Signal Menu
Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control.
Page 168 Setting Options Description Auto Setup Automatically optimizes computer image quality Overscan Auto Changes the projected image ratio to make the edges visible by a selectable percentage or automatically Advanced HDMI Video Range HDMI Video Range: sets the video range to match the setting of the device Input Signal connected to the HDMI input port Video Signal...
Page 169: Projector Feature Settings - Settings Menu
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description Geometry Correction H/V Keystone Adjusts image shape to rectangular (horizontally and Quick Corner vertically) Arc Correction H/V Keystone: lets you manually correct horizontal and vertical sides Quick Corner: select to correct...
Page 170 Setting Options Description Split Screen — Divides the viewing area horizontally and displays two images side-by-side; while in Split Screen mode, press Menu to display the Split Screen options or Esc to cancel split screen display Zoom Varying levels available Adjusts the size of the projected image Image Shift...
Page 171 Setting Options Description HDMI Link Device Connections Adjusts the HDMI Link options that allow the projector remote to HDMI Link control HDMI-connected devices Audio Out Device that support the CEC standard Power On Link Device Connections: lists the devices connected to the HDMI Power Off Link 1/MHL, HDMI 2, and HDMI 3 Link Buffer...
Page 172 Setting Options Description Remote Receiver Front/Rear Limits reception of remote control signals by the selected receiver; Front Off turns off all receivers Rear User Button Light Source Mode Assigns a menu option to the User button on the remote Info control for one-touch access Deinterlacing Closed Caption...
Page 173: Projector Setup Settings - Extended Menu
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Options Description Home Screen Home Screen Auto Disp. Adjusts settings on the Home Screen Custom Function 1 Home Screen Auto Disp.: Custom Function 2 controls whether the Home...
Page 174 Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the Startup Screen screen Color Uniformity Display Background: selects the screen color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts Color Uniformity: adjusts the...
Page 175 Setting Options Description Operation Direct Power On Selects various operation options High Altitude Mode Direct Power On: lets you turn on the projector without pressing Auto Source Search the power button Auto Power On High Altitude Mode: regulates Quick Startup the projector’s operating temperature at altitudes above Date &...
Page 176 Setting Options Description A/V Settings A/V Output Selects the following when the projector is in standby mode Audio Output (turned off): HDMI1 Audio Output A/V Output: the Always On HDMI2 Audio Output setting lets the projector output audio and video signals even HDMI3 Audio Output while it is standby mode;...
Page 177 Setting Options Description Multi-Projection Multi-Projection Selects the following when you use multiple projectors: Projector ID Multi-Projection: matches the Color Mode display settings of multiple Color Uniformity projectors Brightness Settings Projector ID: assigns an ID for the projector when you use Color Matching multiple projectors RGBCMY...
Page 178: Projector Network Settings - Network Menu
Note: You cannot reset the following settings using the Reset option in the Extended menu: • Color Uniformity • User's Logo • Projection • High Altitude Mode • Auto Source Search • Date & Time • A/V Output • Multi-Projection •...
Page 179 Setting Options Description Wireless LAN Power Enables or disables wireless communication Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN Sys. Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Net.
Page 180: Projector Setup Settings - Eco Menu
Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a power-saving setting, a leaf icon appears next to the menu item.
Page 181 Setting Options Description Brightness Settings Light Source Mode Selects the brightness mode of the projector laser Brightness Level Light Source Mode: sets the Constant Brightness brightness for the laser; the Estimated Remains following settings are available: • Normal: sets maximum brightness level •...
Page 182 Setting Options Description Standby Mode Standby Mode Communication On: indicates that the projector can be Port monitored and controlled over a network when the projector is in standby mode; enable this setting to allow the following operations to occur when the projector is in standby mode: •...
Page 183: Projector Information Display - Info Menu
Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Select Version to display the projector's firmware version. Select Light Source Info to display the projector's light source information.
Page 184: Event Id Code List
Information item Description Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code List Parent topic: Adjusting the Menu Settings Event ID Code List If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code.
Page 185 0899 A communication error has occurred. Try restarting the network software and restarting your projector. If that does not solve the problem, contact Epson for help. 089A The EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the security certificate is installed correctly.
Page 186: Projector Reset Options - Reset Menu
Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All Config option on the Reset menu. You cannot reset the following settings using the Reset All Config option: •...
Page 187: Maintaining And Transporting The Projector
The only parts you should replace are the air filter and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. This projector uses a sealed laser light source which does not need servicing and cannot be replaced.
Page 188: Cleaning The Obstacle Sensor
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the projection window. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector may cause a fire. Caution: Do not use canned air, or the gases may leave a flammable residue.
Page 189: Cleaning The Projector Case
Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or laser.
Page 190: Cleaning The Air Filter And Vents
Cleaning the Air Filter and Vents Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them. Caution: Do not use water or any detergent to clean the air filter. Do not use canned air, or the gases may leave a flammable residue.
Page 191 3. Pull the air filter out of the projector. 4. Tap each side of the filter 4 to 5 times to shake off any excess dust. Do this outside the room or away from the projector. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable.
Page 192 canned air; the gases may leave a flammable residue, or push dust and debris into the projector's optics or other sensitive areas. 5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.
Page 193: Replacing The Air Filter
7. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related tasks Turning Off the Projector Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it •...
Page 194 2. Slide the air filter cover latch and open the air filter cover.
Page 195 3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown.
Page 196: Replacing The Remote Control Batteries
5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related tasks Turning Off the Projector Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out.
Page 197 3. Insert the batteries with the + and – ends facing as shown. 4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Page 198: Transporting The Projector
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic:...
Page 199: Solving Problems
• The Help option on the Home screen can display information about common problems, if the projector is operating. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems...
Page 200: Projector Light Status
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. On/Standby light Status light Laser light Temp (temperature) light On/Standby...
Page 201 • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Flashing blue Varies Flashing Varies Laser warning. Turn the projector off, orange unplug it, and contact Epson for help.
Page 202 • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. Flashing blue Flashing A fan or sensor has a problem. Turn...
Page 203: Using The Projector Help Displays
Using the Projector Help Displays You can display information to help you solve common problems using the projector's Help system. 1. Turn on the projector. 2. Press the Home button on the projector or the remote control. 3. Press the arrow buttons to select the help icon and press Enter.
Page 204: Solutions When No Image Appears
Solutions When No Image Appears If no image appears, try the following solutions: • Press the A/V Mute button on the remote control to see if the image was temporarily turned off. • Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
Page 205: Solutions When Image Is Incorrect Using The Usb Display Function
• For images projected with Windows Media Center, reduce the screen size from full screen mode. • For images projected from applications using Windows DirectX, turn off DirectX functions. • If the mouse cursor flickers, select Make the movement of the mouse pointer smooth in the Epson USB Display Settings program on your computer.
Page 206: Displaying From A Pc Laptop
• Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary. • Check the connection from the projector to your video sources. • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor. •...
Page 207: Displaying From A Mac Laptop
Displaying From a Mac Laptop If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.) 1. Open the System Preferences utility and select Displays, Display, or Color LCD. 2.
Page 208: Solutions When The Image Is Not Rectangular
• Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.) • Make sure you selected the correct Projection setting. • Try adjusting the image position using the Image Shift setting. •...
Page 209: Solutions When The Image Contains Noise Or Static
• If you connected an extension power cable, try projecting without it to see if it caused interference in the signal. • If you are using the USB Display function, turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer.
Page 210: Solutions When The Image Brightness Or Colors Are Incorrect
• Clean the projection window. Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen, and directly in front of it. •...
Page 211: Solutions To Sound Problems
• Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, White Balance, and/or Color Saturation. • Make sure you selected the correct Input Signal or Video Signal setting on the Signal menu, if available for your image source.
Page 212: Solving Projector Or Remote Control Operation Problems
• If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port.
Page 213: Solutions To Problems With The Remote Control
• Make sure Sleep Mode is not in effect. • The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson. • Temporarily remove the Ethernet cable and see if the problem continues.
Page 214: Solutions To Password Problems
• If you set a Epson Web Control password and forgot the user ID or password, try entering the following: • User ID: EPSONWEB • Default password: admin • If you set a Remote password (in Epson Web Control) and forgot the user ID or password, try entering the following: • User ID: EPSONREMOTE • Default password: guest •...
Page 215: Solving Network Problems
Solving Network Problems Check the solutions in these sections if you have problems using the projector on a network. Solutions When Wireless Authentication Fails Solutions When You Cannot Access the Projector Through the Web Solutions When Network Alert E-Mails are Not Received Solutions When the Image Contains Static During Network Projection Parent topic: Solving Problems...
Page 216: Solutions When Network Alert E-Mails Are Not Received
• Make sure you have access to the network the projector is on. • Check the IP address on the projector, then reenter the IP address in the browser search bar. Note: The user ID and password are case sensitive. Parent topic: Solving Network Problems Solutions When Network Alert E-Mails are Not Received...
Page 217: Where To Get Help
Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Page 218: Technical Specifications
Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Light Source Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats USB Display System Requirements General Projector Specifications Type of display Poly-silicon TFT active matrix...
Page 219 Brightness Normal Light Source Mode: White light output 4000 lumens (ISO 21118 standard) Color light output 4000 lumens Quiet or Extended Light Source Mode: White light output 2800 lumens (ISO 21118 standard) Custom mode: White light output 2800 to 4000 lumens (ISO 21118 standard) Note: Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions.
Page 220: Projector Light Source Specifications
USB Type B port compatibility USB 2.0 compliant for USB Display, remote mouse control, firmware update, or copying menu settings USB Type A port compatibility Two USB 2.0 compliant ports for USB memory device, Epson document camera, firmware update, or copying menu settings...
Page 221: Projector Dimension Specifications
Projector Dimension Specifications Height (excluding feet) 6.7 inches (172 mm) Width 19.4 inches (494 mm) Depth 17.2 inches (437 mm) Weight 24.3 lb (11.0 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency 50/60 Hz Power supply 100 to 240 VAC ±10% 4.6 to 2.0 A Power consumption Operating:...
Page 222: Projector Environmental Specifications
For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Page 223 Display format Refresh rate (in Hz) Resolution (in pixels) Computer signals (analog RGB) 60/72/75/85 640 × 480 SVGA 60/72/75/85 800 × 600 60/70/75/85 1024 × 768 WXGA 1280 × 768 1366 × 768 60/75/85 1280 × 800 WXGA+ 60/75/85 1440 × 900 WXGA++ 1600 ×...
Page 224 Display format Refresh rate (in Hz) Resolution (in pixels) 640 × 480 SVGA 800 × 600 1024 × 768 WXGA 1280 × 800 1366 × 768 WXGA+ 1440 × 900 WXGA++ 1600 × 900 WSXGA+ 1680 × 1050 SXGA 1280 × 960 1280 ×...
Page 225: Usb Display System Requirements
Parent topic: Technical Specifications USB Display System Requirements Your computer system must meet the system requirements here to use the projector's USB Display software. Requirement Windows Operating system Windows Vista Ultimate, Enterprise, OS X 10.7.x (32- and 64-bit), 10.8.x, Business, Home Premium, and Home 10.9.x, 10.10.x, 10.11.x (64-bit), Basic (32-bit) macOS 10.12.x (64-bit), and macOS...
Page 226: Notices
FCC Compliance Statement Binding Arbitration and Class Waiver Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Parent topic:...
Page 227: Laser Safety Information
• If an error occurs in the projector, turn off the power and unplug the projector immediately. Continuing to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not attempt to disassemble or modify the projector. The projector contains a high-power laser component.
Page 228 • Side...
Page 229: Important Safety Instructions
Parent topic: Notices Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. •...
Page 230 setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and the projector. • Do not operate the projector in a closed-in cabinet unless proper ventilation is provided. • Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector.
Page 231: Restriction Of Use
32 to 113 °F (0 to 45 °C) When using multiple projectors at the same time: 32 to 104 °F (0 to 40 °C) Doing so may cause an unstable display and could lead to projector damage. Do not use or store the projector where it may be exposed to sudden changes in temperature.
Page 232: List Of Safety Symbols (Corresponding To Iec60950-1 A2)
List of Safety Symbols (corresponding to IEC60950-1 A2) The following table lists the meaning of the safety symbols labeled on the equipment. Symbol Approved Standards Description IEC60417 "ON" (power) No.5007 To indicate connection to the mains. IEC60417 "OFF" (power) No.5008 To indicate disconnection from the mains.
Page 233 Symbol Approved Standards Description IEC60417 Polarity of DC power connector No.5926 To identify the positive and negative connections (the polarity) on a piece of equipment to which a DC power supply may be connected. — Polarity of DC power connector To identify the positive and negative connections (the polarity) on a piece of equipment to which a DC.
Page 234 Symbol Approved Standards Description IEC60417 Alternating current No.5032 To indicate on the rating plate that the equipment is suitable for alternating current only; to identify relevant terminals. IEC60417 Direct current No.5031 To indicate on the rating plate that the equipment is suitable for direct current only;...
Page 235: Fcc Compliance Statement
Symbol Approved Standards Description ISO 3864 Disassembly prohibition To indicate a risk of injury, such as electric shock, if the equipment is disassembled. IEC60417 Standby, partial standby No. 5266 To indicate that part of the equipment is in the ready status. ISO3864 Caution, movable parts IEC60417...
Page 236: Binding Arbitration And Class Waiver
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way,...
Page 237 Epson has in its records for you. For this reason, it is important to notify us if your address changes by emailing us at EAILegal@ea.epson.com or writing us at the Epson Address above. Notice of the Dispute shall include the sender's name, address and contact information, the facts giving rise to the Dispute, and the relief requested (the "Dispute Notice").
Page 238 Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if any;...
Page 239: Trademarks
1.8 Amendments to Section 1. Notwithstanding any provision in this Agreement to the contrary, you and Epson agree that if Epson makes any future amendments to the dispute resolution procedure and class action waiver provisions (other than a change to Epson's address) in this Agreement, Epson will obtain your affirmative assent to the applicable amendment.
Page 240: Copyright Notice
Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Epson PowerLite 700U User Manual

Quick Links

Related Manuals for Epson PowerLite 700U

Summary of Contents for Epson PowerLite 700U