Inserting A Minidisc - Sharp MD-MT190H Operation Manual

Inserting a MiniDisc

MD-MT190H
ENGLISH
When you record on a MiniDisc,
check that the erase prevention
Recordable Recording
tab is set to the "Recordable"
prevented
position.
E-9
1
Slide the OPEN lever to release the compart-
ment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:


Do not place the MiniDisc under the holder.


If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resis-
tance is felt, remove the MiniDisc and reload it.


The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 13.
01/10/29 MD-MT190H(SEEG)_2.fm