Editing A Recorded Minidisc - Sharp MD-MT190H Operation Manual

Hide thumbs Also See for MD-MT190H:
Table of Contents

Advertisement

Editing a Recorded MiniDisc

MD-MT190H
ENGLISH

To erase one track at a time
1
Start playing the track to be erased, and press the
button.
2
Press the MENU/CHRG button repeatedly to se-
lect "EDIT".
3
Press the ENTER/SYNC button.
4
Press the MENU/CHRG button repeatedly to se-
lect "ERASE".
5
Press the ENTER/SYNC button.
To cancel the operation, press the :OFF/HOLD but-
ton.
6
Press the ENTER/SYNC button again.
The track will be erased.
7
To erase other tracks, repeat steps 1 - 6.
Note:
Complete the operation within 7 seconds whilst select-
ing the menus.
E-33

To erase all of the tracks at once
1
Whilst in the stop mode, press the MENU/CHRG
button repeatedly to select "EDIT".
2
Press the ENTER/SYNC button.
3
Press the MENU/CHRG button repeatedly to se-
lect "ALL ERASE".
4
Press the ENTER/SYNC button.
To cancel the operation, press the :OFF/HOLD but-
ton.
5
Press the ENTER/SYNC button again.
All of the tracks will be erased.
Caution:
Once a track has been erased, it cannot be recov-
ered. Check the track number before erasing it.
01/10/29
MD-MT190H(SEEG)_5.fm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents