Special Modes Adjustment; Checking The Input Signal - Sharp XV-Z91E Operation Manual

Adjusting the Computer and DVD/DTV Images
2,3,4
5
On-screen Display
2,3
On-screen Display

Special Modes Adjustment

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in "Special Modes" on the "Fine Sync" menu screen
may need to be selected to match the computer display
mode.
1, 6
1 Press MENU. The "Picture" menu screen appears.
2 Press
3 Press
4 Press
5 Press ENTER to save the setting.
6 To exit the menu screen, press MENU.
• Avoid displaying computer patterns which repeat every other line
(horizontal stripes). (Flickering may occur, making the image hard
to see.)
• When inputting DTV 1080
of signal in step 4 above.
• When inputting 720P RGB signal, select the corresponding type
of signal in step 4 above.

Checking the Input Signal

This function allows you to check the current input signal
information.
1 Press MENU. The "Picture" menu screen appears.
2 Press
1, 4
3 Press
4 To exit the menu screen, press MENU.
/ to display the "Fine Sync" menu
screen.
to select "Special Modes", and then
/
press .
to select the optimal resolution.
/
I
signal, select the corresponding type
/ to display the "Fine Sync" menu
screen.
/ to select "Signal Info" to display the
current input signal.
-34