Specifications - Sharp XV-Z91E Operation Manual

Specifications

Product type
Video system
Display method
DLP panel
Projection lamp
Video input signal
S-video input signal
Component input signal
(INPUT 1)
Component input signal
(INPUT 2)
Component RGB input signal
(INPUT 2)
Horizontal resolution
RGB input signal
Pixel clock
Vertical frequency
Horizontal frequency
Computer control signal
Rated voltage
Input current
Rated frequency
Power consumption
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This SHARP projector uses a DMD chip. This very sophisticated chip contains 480,000 pixels. As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.
Projector
Model XV-Z91E
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
I
DTV 480 /480P/720P/1080
DLP chip, RGB optical shutter method
Panel size: 0.55
Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
Drive method: Digital Light Processing (DLP™)
No. of dots: 480,000 dots (800 [H]
Lens 1–1.2 zoom lens, F3.0, f=32.5–44.0 mm
150 W SHP lamp
RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
RCA Connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
: 0.7 Vp-p, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
15-pin connector
Analog 0.7 Vp-p 75 Ω
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
: 0.7 Vp-p, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
15-pin connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
520 TV lines (NTSC 3.58 input)
15- D-
PIN MINI SUB CONNECTOR
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75 Ω terminated
H .
ORIZONTAL SYNC SIGNAL
V . : Same as above
ERTICAL SYNC SIGNAL
12–110 MHz
43–75 Hz
15–70 kHz
9-pin D-sub connector (RS-232C Port)
AC 100–240 V
2.1 A
50/60 Hz
200 W
750 BTU/hour
5°C to 35°C
20°C to 60°C
Plastic
38 kHz
368 (W) 153.8 (H)
368 (W) 118 (H)
4.3 kg (including swivel stand)
3.8kg (main body only)
Remote control, Two AA size batteries, Power cord, Computer RGB cable, 21 pin RCA
conversion adaptor, Video cable, Terminal cover, Screws for terminal cover, Lens cap
(attached on the body), Lens cap strap, Operation manual
Lamp unit (Lamp/cage module) (BQC-XVZ90+++1), Remote control (RRMCGA099WJSA),
AA size batteries, Power cord for Europe except U.K. (QACCV4002CEZZ), Power cord for
U.K., Hong Kong and Singapore (QACCBA012WJPZ), Power cord for Australia and New
Zealand (QACCL3022CEZZ), Computer RGB cable (QCNW-5050CEZZ), 21 pin RCA
conversion adaptor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ), Terminal cover
(GCOVAA116WJKA), Screws for terminal cover (XBBSN40P10000), Lens cap
(CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manuals; for
European 7 languages (TINS-A645WJZZ) / for Chinese, Korean and Arabic (TINS-
A646WJZZ)
Specifications are subject to change without notice.
I
600 [V])
(INPUT 2):
: TTL level (positive/negative) or composite sync (Apple only)
327 (D) mm (including swivel stand)
327 (D) mm (main body only)
-56