Masking Adjustment - Sharp XV-380H Operation Manual

Masking Adjustment
On-Screen Display
Normal Mode
NASKINO AD.,.
,NORYAL
NODE1
YODLl
..:
SLL.
MEND:
XND
Vista Mnrip
YASKINO
ADJ.
NORYAL
bYODE
NODE2
Av:
SEL. YXND:
NEXT
I ~ASKIHO AD.,.
NORMAL
NODS1
bNODL7
CinemaScope Mode
n
The Masking function can be used to increase your
enjoyment of wide-screen pictures - such as laser disc
and videotaped
movies - by eliminating video noise and
blacking out the top and bottom portions of the screen.
This projector
offers you a choice of three modes: "Normal
Mode",
"Vista Mode", and "Cinema- Scope/Letterbox
Mode".
Press the MENU button, While the MENU screen is
displayed, press the ADJUSTMENT T/A buttons to select
MASKING ADJ., and then press the MENU button. The
MASKING ADJ. screen will appear as shown on the left.
Press the V/A buttons to change the mode. Vista Mode IS
indicated by MODE 1 and CinemaScope Mode is indicatec
by MODE 2.
In Masking mode, the screen changes as shown.
Notes:
l
When viewing, please be aware that use of this image
masking function may infringe on the legally protected
copyrights of the producer of the video software.
l
Video software recorded in one mode cannot be convertec
and viewed in another mode.
l
The image will only be masked off and not converted.
1. How to Adjust Masking
YASKINO
ADJ.
NORMAL
bYODE
MODI
..: SEL.
IEND : NEXT
293
YASXINO ADJ.
Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT V/A buttons to select
"MASKING ADJ.", and then press the MENU button. The
MASKING ADJ. screen will appear as shown on the left.
After selecting the mode, press the MENU button to displa:,
the ADJUSTMENT mode screen.
2. Press the V/A buttons.
l
Use the V/A buttons to choose the masked portion you
want to adjust as indicated by the yellow A or v mark.
l
Each time you press the button, the mark on the screen WI/
change as shown.
l
The A or v mark is displayed for about 30 seconds.
Adjusting the upper masking
3. Adjust with the d/b buttons.
l
Pressing the d/b buttons while the A or v mark appears
on the screen causes the masking to become thicker or
thinner.
Adjusting the lower masking
To return to the factory preset settings
Press the power button OFF and unplug the AC cord while
the fan is still running. Plug the AC cord back in, and after 60
seconds press the power button back ON.
o-16