Connecting The Projector; Attaching The Terminal Cover - Sharp XV-380H Operation Manual

Connecting the Projector (VIDEO IJIDEO
2)
To watch video playback with the projector connected to audio/video output equipment, such as a VCR
or
Laser Disc Player, or to view on a separate monitor, make the following connections.
l
Always turn off the LCD Projector while connecting to video equipment, in order to protect both the
projector and ,the equipment being connected.
Note the following
when using the
S-VIDEO INPUT terminal:
l
The S-VIDEO INPUT terminal uses a video signal system
in which the picture is separated into a co101
and a luminance signal to realize a higher-quality picture.
l
The S-VIDEO INPUT terminal has priority over the VIDEO INPUT terminals. Make the audio connectiol
the VIDEO INPUT audio terminals (left/right).
Jr
7
via
n
The projector is provided with a terminal cover to hide connecting cables.
)
Attaching the terminal cover Detaching the terminal cover
While pressing the 4 marked
areas, pull out to remove.
@ Push in the other 4 marked claw.
l
Lead the connecting cables out through the
upper or lower notch in the centre of the cover.
c
l
When the projector is ceiling mounted, invert the terminal cover before attaching.