Using The Adjustment Feet - Sharp XG-P560WA Operation Manual

Image Projection
1
Press H&V LENS SHIFT on the
projector or on the remote control.
• Pressing ENTER on the projector or on
the remote control displays the test pat-
tern. Checking the test pattern is useful
for more accurate adjustment.
▼On-screen display
2
Press ', ", \ or | on the pro-
jector or the remote control to
adjust the image position.
Note
• When UNDO is pressed, the lens shift reset
screen is displayed. Lens shift can be reset
to factory default with this screen.

Using the Adjustment Feet

• When the position of the projected image cannot be adjusted
with the lens shift function, use the adjustment feet to adjust
the projected angle.
• The height of the projector can be adjusted using the
adjustment feet when the screen is located higher than the
projector, the screen is inclined or when the installation site
is slightly inclined.
• Install the projector so that it is as perpendicular to the
screen as possible.
1
Rotate the adjustment feet to
adjust the projected angle.
• The projector is adjustable up to approxi-
mately 5 degrees.
Warning!
• Do not hold the lens and lens cover when
projector angle is adjusted.
• Use caution not to pinch your finger in the
space between the adjustment foot and the
projector when the projector angle is lowered.
-30
Adjustment feet
Down Up
H&V LENS SHIFT
button
Mouse/adjustment
button
('/"/\/|)
ENTER button
UNDO button
H&V LENS SHIFT
button
Adjustment buttons
('/"/\/|)
ENTER button
UNDO button
Up Down