Connecting A Component Video Source - Epson PowerLite 1810p User Manual

Connecting a Component Video Source

You will need a special cable to connect your component video
equipment to the HD15 (VGA-style) connector on the projector. You
can order the HD15 to component cable (ELPKC19) from Epson; see
page 11 for more information.
1. Locate an HD15 to component video cable or adapter.
2. Connect the cable to your player and the
connector on the projector.
Computer 2
HD15 to component
adapter
3. You may need to change the
setting in the projector's Signal menu to
Input
(see page 53).
4. If you want to play sound through the projector, see page 44 for
instructions on connecting audio cables.
5. If you don't need to make any other connections, see page 15 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
button on the remote control or press the
Search
button on the projector's control panel repeatedly until
Search
the image appears.
Computer 1
HD15 to component cable
(ELPKC19)
or
Computer1 Input Computer2
Component
Source
Connecting to Computers and Other Equipment
or
note
Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player's documentation.
Also, make sure the
Computer Input setting in
the Signal menu is set to
Auto or Component Video
(see page 53).
41