Shutting Down The Projector; Displaying An Image - Epson PowerLite 1810p User Manual

note
Lamp life results will vary
depending on mode selected,
environmental conditions,
and usage.
Turn off this product when
not in use to prolong the life
of the projector.
Displaying and Adjusting the Image
18

Shutting Down the Projector

This projector incorporates Instant Off technology. To turn it off, you
can press its P
Power
off a power switch that supplies power to the projector. You don't
have to wait for the projector to cool off first.
1. To turn off the projector, press the P
remote control or projector.
You see a confirmation message.
(If you don't want to turn it off,
press any other button.)
2. Press the P
Power
projection lamp turns off and you can unplug the power cord.
If you want to turn the projector on again, make sure the orange
light is not flashing, then press the P
Power

Displaying an Image

You may need to select the image source if you have multiple video
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.
If you don't see the image you want, press the
remote control or the
Source Search
you see the image you want to project.
You can also use the
Source
between devices connected to the ports identified on each button. The
PowerLite 1810p does not support EasyMP.
button as described below, unplug it, or turn
Power
button again. The
button on the projector until
buttons on the remote control to switch
TM
button on the
button.
Power
button on the
Search