Epson PowerLite 1810p User Manual page 82

Solving Problems
82
Try adjusting the
■
Brightness
menu.
Check your computer display settings to correct the color balance.
■
The projector's lamp may need to be replaced. See page 66 for
■
instructions.
Make sure the correct input signal is selected in the Signal menu
■
(see page 53).
There is no sound, or the sound is not loud enough.
■ Use the buttons on the remote control to adjust the
Volume
volume, or adjust the
page 54).
Make sure A/V Mute is not enabled. (The
■
have been pressed.)
Make sure the A/V mute slide (lens cover) is open.
■
■ If your presentation includes computer audio, make sure the
volume control on your computer is not turned all the way down
or muted. In Windows, you may be able to check this by clicking
the volume control in your Windows system tray (lower right
corner of the screen). On a Mac, you may be able to adjust the
volume from your menu bar (top right corner of the screen) or via
the volume control function keys.
If you're using a DVD player or other video source, make sure the
■
cables are connected correctly, as described on page 44.
If you're using a computer audio cable, make sure it is connected
■
to your computer's
Connect the other end to the projector's
computer's video cable is connected to the
Otherwise, connect the cable to
for the computer's video connection.
Computer2
and settings on the Image
Contrast
setting in the Settings menu (see
Volume
A/V Mute
headphone jack or
Audio1
Computer1
if you're using
Audio2
button may
audio out jack.
port when the
port.